Xiegu X108 QRP Transceiver Kit
9 Bands – AM – SSB – CW
1 – 20 watts
The X-108 is a single-conversion transceiver for all amateur radio bands from 160-10m. The device provides an output power of 1-20W on all amateur radio bands, including the WARC bands.
In the X-108 transceiver from CQXIEGU now work separate filters. During the X-108 for SSB operation has a 2.4 kHz filter, the ambitious CW operator will appreciate the narrow 500Hz filter for this mode. Likewise, a keyer with adjustable speed is integrated.
The Color-Display of the X-108 ha in contrast of the X1M now a S-Meter and a Power-Meter build in. At the same time the SWR is displayed next to the parameters currently set.
In the Receiver of the X-108 CQXIEGU paid attention to high-quality components, so that this single superhet with the double diode mixer in addition to the excellent dynamic range also offers a low noise receiver. The receiver sensitivity is 0.2μV and double loop band-pass filters ensure a perfect reception on all bands. This is supported by a built-in AGC, a pre-amplifier and an attenuator. Optionally, a Noise Blanker be available (included in the Deluxe version).
The Transmitter provides an output power of max. 20W in the modulation modes AM, USB, LSB and CW. A built-in protection circuit protects the transmitter from a too high SWR and safe X-108 reliably against mismatches. The spurious rejection is ≥ 40dBc. In the standard version, the X-108 of CQXIEGU have a frequency stability of 1.0ppm, which can be improved by an optional TCXO to 0.5ppm (included in the DELUXE version already). An audio compressor is provided.
The X-108 has a rear-panel USB port so you can control the small transceiver with a computer. Firmware updates can also uploaded. In addition, there are on the back of the connectors for external accessories and the 12V power supply also.
X108 QRP Transceiver | ||
Features | ||
Microphone – multifunctional | ||
CW Filter (500 Hz) | ||
SSB Filter (2.4 kHz) | ||
AGC | ||
S Meter – PO Meter – SWR Meter | ||
Adjustable 1-20 watt output | ||
Modes – AM – SSB – CW | ||
0.5 – 30 MHz (9 filtered ham bands) | ||
High SWR protection | ||
Pre-amplifier / Attenuator | ||
USB control port (uses plain USB-a to USB-b cable) |
||
CW Keyer | ||
SO239 antenna connector | ||
0.5 ppm TCXO Module | ||
Noise Blanker Module | ||
Front & Rear Handles | ||
4-3/4 x 1-3/4 x 7-1/16 inches | ||
Radio Weight – 1 kg – 2.2 lb | ||
Mic Weight – 0.143kg – 5oz | ||
12.5 – 14.5 vdc / 0.5 – 6.0 amps | ||
$695.00 |
Warning: file_get_contents(https://plusone.google.com/_/+1/fastbutton?url=https%3A%2F%2Fqrznow.com%2Fxiegu-x108-qrp-transceiver-kit-9-bands-ssb-cw%2F): failed to open stream: HTTP request failed! HTTP/1.0 404 Not Found in /home/qrznow/public_html/wp-content/themes/goodnews5/framework/functions/posts_share.php on line 151