David, N9BSA, is trying to merge two antennas using a Diamond Phasing Harness ss770r, but Dave has a better suggestion….
The MFJ-916B duplexer is a series of inductance coils and capacitors that acts as a band-pass filter. Your MFJ duplexer can be used two different ways. The duplexer combines the output of the HF/VHF transceiver and the output of the UHF transceiver so that both transceivers can be connected to the same antenna. The duplexer can also be used to separate HF/VHF transmissions from UHF transmissions so that one transceiver can be connected to two antennas.
The MFJ-916B is designed for indoor use. If you use the MFJ-916B outdoors, it should only be used for short periods of time under good weather conditions. Do not use the duplexer outdoors when there is any kind of precipitation.
“After several attempts to build a multiband C-Pole I finally ended up with the Multiband H-Pole. C-Poles for different frequencies on one pole... Read more
G3TXQ 6 Band Hexbeam 40m single element add on kit Some of you may remember the 7 band Hexbeam that was in production a few years ago. Due to the comp... Read more
Details of the new Expert Sun MB1 SDR Transceiver. It covers 160m to 2m and delivers 125W on the HF bands and 60W on 2m. This radio is available from... Read more
Jim W6LG your YouTube Elmer shows the progress on the MA40 Tower Installation that will be limited to 30 feet above the terrain as allowed by Ordinanc... Read more