SSB: 2200Z February 22 to 2200Z February 24
DEADLINES FOR LOG SUBMISSIONS ARE 5 DAYS!
For amateurs around the world to contact other amateurs in as many U.S. states, Canadian provinces, and countries as possible utilizing the 160 meter band.
II. BAND USE:
1810–2000 kHz in ITU Region 1. 1800–2000 kHz in ITU Regions 2 and 3. All entrants are encouraged to spread out as much as possible, obeying frequency restrictions and power limits for their own country. Any violations of the ITU band use may result in disqualification.
For Single Operator Assisted Only: The use of one and only one remote receiver located within 100 kilometers of the main transmitter site is permitted, in addition to the receiver at the transmitter site. WebSDRs are OK, but must be located within the 100-KM limit. The rule is designed to accommodate new technology, and for those who experience high noise levels at the transmitting site. Anyone found using a remote receiver outside the limit will be subject to disqualification.
For all categories: The main site is defined as all transmitters, receivers, and antennas must be located on the same contiguous property. If the property is not contiguous, then all equipment must fall within a 1500-meter radius. All antennas must be connected by wires to the main station. This rule applies to all entrants.
The use of any so-called “Chat Rooms” via the internet or similar means for communication between stations or operators during the contest period is strictly prohibited. Do not arrange or confirm QSOs by any other means than the use of the 160-meter band and the same mode as used in the contest. Any such use may result in disqualification at the discretion of the committee. The use of self-spotting is not allowed in any category.
Remote operation for categories other than Single Operator Assisted is permitted under the following conditions:
- The use of any receiver located away from the main site is strictly prohibited.
- The use of a separate receiver at the remote control location is prohibited.
- Any receiver linked via the Internet or RF not physically located at the main site is strictly prohibited.
- If the remote station is located in another DXCC entity, it is required to comply with all local country regulations.
Operating time: Each contest is 48 hours long and starts at 2200Z. Single operator stations may only operate 30 out of the 48 hours. Multi-Operator stations may operate 40 hours. Off times must be a minimum of 30 minutes in length for all categories.
(A) Single Operator: One person performs all of the operating, logging, and spotting functions. Maximum operating time is 30 hours. Passive spotting is NOT allowed. (See definition of passive spotting functions below.) Only one transmitted signal is allowed at any moment in time. Maximum power is 1500 watts total output.
(B) Single Operator/Low Power: Same as (A) with the exception that the output power shall not exceed 150 watts. Stations in this category compete with other Low Power stations only.
(C) QRP: Same as (A) with the exception that the output power shall not exceed 5 watts. Stations in this category compete with other QRP stations only. Note: There is no Assisted category for QRP entrants.
(D) Single Operator Assisted: HIGH POWER ONLY. Same as (A) with the following exceptions: The use of passive spotting IS allowed (See definition of passive spotting functions below); The use of one and only one remote receiver within 100 kilometers of the transmitter site is allowed.
(E) Multi-Operator: HIGH POWER ONLY. All rules apply as in Single Op Assisted (except remote receivers ARE NOT allowed); however, more than one operator (person) is involved in the operation. Maximum operating time is 40 hours. Only one transmitted signal is allowed at any moment in time. Maximum power is 1500 watts total output or the output power allowed by your country, whichever is less. The use of passive spotting is allowed.
Passive Spotting is defined as (but not limited to):
- DX spotting nets or QSO alerting assistance of any kind.
- Over-the-air nets or stations that provide frequency and station information.
- Any device or person that provides frequency and callsign information of any station during the contest period. This includes band skimmers or similar devices. Passive spotting does NOT include band scopes, SDR receivers, or the like, which provide no information about the signal other than its presence, which is allowed in all categories.
RS(T) and state for U.S., province for Canada, and CQ Zone for DX. Note: Zones are location indicators only and do not count for multipliers.
U.S. States: (48 contiguous states); U.S. District of Columbia (DC) (1)
Canadian Provinces: (14) VO1, VO2, NB, NS, PEI (VY2), VE2, VE3, VE4, VE5, VE6, VE7, VE8 (NWT), VY1 (YUK), VY0. Note VO1 and VO2 are separate due to tradition.
DXCC plus WAE countries: WAE: GM/Shetland (Shetland Islands), IG9/IH9 (African Italy – Lampedusa and Pantelleria Islands), IT, JW (Bear Island), TA1 (European Turkey), 4U1VIC (Vienna International Center), Z6 (Kosovo).
Contacts with stations in own country: 2 points.
Contacts with other countries on same continent: 5 points.
Contacts with other continents: 10 points
Maritime mobile contacts count 5 points. There is no multiplier value for a maritime mobile contact.
All stations—the final score is the result of the total QSO points multiplied by the sum of all multipliers (states, VE provinces, DX countries).
Certificates will be awarded to the top scorers in each class (see provisions under classes) by state, Canadian area, and DX country. Runners-up with high scores over 100,000 points may also receive certificates. The trophies and donors for all categories can be found on the official contest web site CQ160.com. If you are interested in sponsoring a plaque, please contact us at: <questions@CQ160.com>.
IX. CLUB COMPETITION:
Any club that submits at least three logs may enter the Club Competition. The name of the club must be clearly identified under club competition on the summary sheet, or summary portion of the Cabrillo log. Please make sure all entrants from your club use the same club name (spelled the same) in the Cabrillo entry. Non-compliance with this request may result in your score not being credited to your club’s entry.
X. LOG INSTRUCTIONS:
The deadline for log submissions is 5 days from the end of the contest.
For CW this is 2200z Feb 1, 2019.
For SSB this is 2200z Mar 1, 2019.
The submission of Cabrillo logs is required. Please submit CQ WW 160 Meter Contest logs via the web upload tool found at: https://cq160.com/logcheck/
Paper/Disk logs: Paper logs or other formats than Cabrillo will be considered for Check Logs only. *
Mail all paper logs to: CQ 160 Meter Contest, c/o N2NT, PO Box 25, Dayton, NJ 08810 USA. Indicate CW or SSB on the envelope.
For hardship cases that require more time for log submission, send an e-mail to <director@CQ160.com>. We will make every effort to accommodate you if you have a valid reason for delay.
Cabrillo formatted logs are received by a log processing robot. If your log has been submitted correctly, the robot will reply with a confirmation. If there is a problem with your log, the robot will send you an error message containing suggestions for how to fix your log. Read this e-mail carefully. Most log submission problems are minor and can be corrected in one pass. Submit your log as many times as needed. The last submitted log will be the version that counts for your official entry. You can check the status of your log at our web page Log Received tab. Other inquiries may be sent to <questions@CQ160.com>.
Be sure to send in paper and diskette based logs early to ensure receipt by the deadlines. Unreadable paper logs will be classified as check logs.
XI. PENALTIES AND DISQUALIFICATION:
Logs will be cross-checked and penalties will be applied at the committee’s discretion for contacts determined to be bad or busted. The bad QSO is removed and a penalty of two more equivalent QSOs is applied to the points only. No penalty should be applied for unique QSOs unless they are deemed excessive. A log may be disqualified for violation of amateur radio regulations, unsportsmanlike conduct, or claiming excessive unverified contacts.
Report file outputs showing final score calculations will be available for all entrants after the results are published. The decisions of the CQ WW 160 Contest Committee are final.
By submitting a CQ 160 Meter Contest log, and in consideration of the efforts of the CQ WW 160 Contest Committee to review and evaluate that log, an entrant unconditionally and irrevocably agrees that he/she has: 1) read and understood the rules of the contest and agrees to be bound by them, 2) operated according to all rules and regulations that pertain to amateur radio for the station location, 3) agreed the log entry may be made open to the public, and 4) accepted that the issuing of disqualifications and other decisions of the Committee are official and final. If an entrant is unwilling or unable to agree to all of the foregoing, the entrant should not submit the entry or submit the entry as a Checklog only.
See More – CQ WW
“How high should a dipole be? What happens if it’s too low or too high? We turn to EZNEC antenna modeling software to see that the old rul... Read more
A standard AA-30 analyzer but without enclosure, LCD display and keypad. But .ZERO is even more powerful than the good old AA-30. Description RigExper... Read more
Siru Innovatios SDR20 multi-touch portable SDR Features: 2-channel transceiver operation Two methodologies for implementation: IQ Mod / Demod and Dire... Read more
RigExpert AA-230 ZOOM – Antenna and Cable Analyzer 100 kHz to 230 MHz The analyzer is designed for measuring SWR (Standing Wave Ratio), Return... Read more
Plug & Play Auto Tuner Plug & Play! You won’t even know it’s there . . . MFJ-939I/K/Y automatically tunes your antenna as you tune your radio.... Read more
DX Hunter – The amateur radio App for DX-enthusiasts Description DX-Hunter is an application for amateur radio operators, short wave listeners a... Read more