There have been recently a number of reports of individual holders of UK Amateur licenses gaining Innovation and Trial licences from Ofcom to conduct experimental transmissions on 40MHz (8m)
Ofcom has made it very clear for several years that there was no likelihood of UK radio amateurs gaining any access to 40MHz which included NoV (Notice of Variation) to a UK amateur licence or an amateur SRP (Special Research Permit). The RSGB has consulted Ofcom as to the exact status of these Innovation and Trial licences. Ofcom’s reply was as follows:
“We have been approached by a couple of individuals wanting to conduct experiments in the band. Like all other research and innovation requests Ofcom receives we have put these through our Innovation and Trial licensing regime. If the coordination checks are passed, they are being issued with an Innovation and Trial licence. These are issued for up to 12 months on a non-interference, no protection and non-operational basis. These are not Amateur Radio Special Research Permits and licensees do not fall under the Amateur Radio licence terms and conditions. Therefore, applicants are not required to have passed an amateur exam or hold a callsign. Although we are allowing this experimentation, we would like to make it clear that we have no proposals to allow wider amateur radio access to the 40 MHz band.
Clause 9(6) of the UK amateur terms states “The Licensee may receive Messages from an overseas amateur or from an Amateur duly authorised by Ofcom on a frequency band not specified in Schedule 1 but the Licensee may only transmit on a band specified in Schedule 1 which is authorised under Clause 9(2).”
Users of 40 MHz under an Innovation and Trial (I&T) licence are not authorised under the Amateur Radio licensing regime and there is no requirement to have passed an amateur radio exam to obtain such a licence. Clause 9(6) of the Amateur licence is designed to cover additional frequencies, such as 70 MHz and 146 MHz, which are not contained in Schedule 1 of the Amateur Radio licence but Ofcom has authorised via a Notice of Variation (NoV). We would like to make clear that we have not duly authorised any amateur to use a frequency band not specified in Schedule 1 through this process. Reception of transmissions authorised under an I&T Licence should therefore be treated the same as those authorised under other licences that Ofcom issues such as business radio or maritime.
We would also like to make clear that I&T licences do not permit operational or commercial use. These licences are designed to support individuals and companies in carrying out research, development, testing and demonstrations of equipment. Therefore, the use of the 40 MHz band under this licence should be for these purposes only. The licences are granted on the basis that the user will be carrying out such research and not operating on the band in a similar way to the frequencies listed in Schedule 1 of the licence.”
Ofcom’s view is very clear. Any operation on 40MHz
in the UK is not Amateur radio and therefore cross-band contacts to such stations by UK radio Amateurs operating on the bands licenced for amateur radio are not permitted.
Antenna
New AAS-300 3-way antenna splitter
AAS-300 3-way Antennasplitter up to 300 MHz The AAS-300 antenna splitter can distribute the signal of a receiving antenna to up to 3 recipients. About... Read more
The Take-off Angle Theory
“Kyle, W0AAV, is wondering if there is an optimal angle to put his vertical antenna or is the Take off angle not really important or is is more... Read more
Alpine Mobile Antenna Model 100S
Alpine Mobile Antenna Model 100S Basic model is unpainted silver with a neopreen cover. All models are: 500 Watts 6-80 Meters Motorized 12 volt 39... Read more
MFJ 1982MP End Fed Antenna
“This video is about the MFJ-1982MP End Fed antenna. You can find them using the link below. The MFJ-1982 covers 80-10 meters. This antenna can... Read more
Review
RigPi RigPi MFJ-1234 Station Server, Remote Ham Radio @Hamvention
RigPi MFJ-1234 “Our first look at the brand new RigPI Remote station server called the MFJ-1234. This little beauty allows you to connect and co... Read more
SteppIR CrankIR + Sark-110 “Full portable kit” Unboxing – Part 1
“” “The SteppIR CrankIR is portable a vertical HF and 2 meter antenna, it’s lightweight, high performance, extremely portable... Read more
Xiegu GSOC – An Overlook of Functions and Features
Xiegu GSOC – An Overlook of Functions and Features Read more
“This week I’m reviewing the Openspot by Shark RF. No images to hunt down, It runs D-Star, DMR & Fusion all in one box. Don’t fo... Read more
Equipment
4O3A – STATION GENIUS
Station Genius can control: 4 Square Antenna Systems Antennas Antenna Switches Band Pass Filters Beam Stacks Beverages Rotators RS-232 Devices Station... Read more
Perseus 22 -INTRODUCING NEXT-GEN SDR RECEIVER
Perseus22 is a 4 channels, direct sampling receiver with a continuous frequency coverage from 10 KHz to 225 MHz and a typical image rejection larger t... Read more
(tr)uSDX Prototype: on-board measurement equipment demo
Short teaser of the on-board measurement equipment. This is by far not the final software, but it shows the hardware features we have, making life for... Read more
VisAir – HF DSP Transceiver Standalone DDC DUC
Microprocessor-based data processing. A distinctive feature of the transceiver is the modern technology of processing data in DSP and output informati... Read more
Kenwood TS-990S HF/6m Flagship Base Station Being Built
Kenwood TS-990S HF/6m Giving you a rare glimpse behind the scenes at Kenwood’s Communications Division factory at Yamagata, in northern Japan,... Read more