The ID-52E Dual-Band D-STAR Digital Transceiver has only been available to buy for just a short time, and you may have already purchased one or be in the market to buy one. Together with Bob McCreadie (G0FGX) and his colleagues at TX Films, we are pleased to share with you this comprehensive yet simple to understand video which not only provides a great introduction to this radio but also provides many tips on how to use it.
In the video Bob…
– Demonstrates how to operate the ID-52E and many of its features/settings.
– Provides an overview of the ID-52E’s GPS, D-STAR and Bluetooth capabilities.
– Explains how to work with channels/memories.
– Demonstrates how to use the CS-52 cloning software
D-52E Dual-Band D-STAR Digital Transceiver
The ID-52E is a VHF/UHF dual band radio with D-STAR and FM dual mode functions. The ID-52E supports conventional FM communications as well as D-STAR simplex, repeater, regional, and worldwide calls over the D-STAR Internet gateway. With the ID-52E, you can call a friend in another city, or even internationally through D-STAR repeaters, with digital clear audio. In addition, the ID-52E can send digital voice with data, text messages, GPS location information and pictures.
Worldwide Communication Through the D-STAR Network
The ID-52E provides D-STAR simplex, repeater, regional, and worldwide calls over the D-STAR Internet gateway as well conventional FM communications. Call a friend in another city, or even internationally through D-STAR repeaters, with digital clear audio.
Picture Sharing Function
Share pictures with other users and see received pictures on the colour display. Pictures taken on an Android device can be wirelessly transferred to the ID-52E via Bluetooth.
DR (D-STAR Repeater) Function
The expanded DR (D-STAR Repeater) function makes D-STAR and FM repeater communication easier to use. Combined with the GPS function, selection of an available local repeater is available with a couple of button pushes, based on your location. Additionally, DR mode supports reflector linking controls.
Terminal Mode and Access Point Mode*
Connect the ID-52E to the Internet through a Windows PC or an Android device. The Internet gateway (using Terminal mode and Access Point mode) enables you to access the D-STAR repeater network, even from areas where no D-STAR repeater is directly accessible via radio.
・ Terminal and Access Point modes are compatible with Icom RS-RP3 Gateway Software. If your D-STAR repeater is running G1 or G2 software, please contact your local Icom Distributor to upgrade software. ・ You need an Internet connection with an IPv4 Global IP address. If you use a cellular system, you need an IPv4 Global IP address assigned to your Android device. ・The RS-MS3W optional software is required to be installed in the PC (Download from Icom website). The RS-MS3A optional application software is required to be installed in the Android device (Download from Google Play). USB cable is required. Type-A: User supplied. Type-C: OPC-2418. micro-B: OPC-2417.
2.3″ Large Colour Display
The ID-52E features a 2.3-inch colour display (320 × 280 pixels) which provides excellent viewability. The display background colour is selectable from black and white.
Bluetooth Enabled Features
The optional VS-3 Bluetooth headset enables hands-free wireless operation. In addition to the PTT and volume up/down buttons, the VS-3 has three programmable buttons that can be assigned functions to improve operation.
You can connect to an Android device through Bluetooth. With the Android device together with the RS-MS1A Remote Control Software installed, you can wirelessly control the ID-52E to change operating frequencies and other settings.
Handheld Radio First! Waterfall Display
The waterfall display shows not only the existence of signals but also the changes of signal level in chronological order. You will have an overview of the band conditions in more detail, including busy frequencies currently used, or open frequencies not used. The band scope mode is selectable from center mode, Fixed mode and Fixed scroll mode.
V/V,U/U,V/U Dualwatch Including DV/DV Mode
The Dualwatch function monitors the VHF/VHF, UHF/UHF and VHF/UHF bands simultaneously*. You can quickly respond to a call from the Main and Sub bands. Two DV signals can be decoded at the same time.
* AM/AM mode Dualwatch is not possible. AM signals can be received on only the Main VFO (A band).
VHF/UHF Airband and FM Broadcast Receiver
Airband reception is expanded from VHF to UHF military Airband (225 to 374.995 MHz). FM broadcast stations can be listened to while using the dualwatch function.
Integrated GPS/GLONASS Receiver
D-PRS mode is supported by the internal GPS receiver for sending your location and showing received station location, distance, and direction from your current location. In addition to your location, the ID-52E displays your current Grid Square information. The GPS position data can be used for Position Auto Reply, Near Repeater Search, and GPS log functions.
microSD Card Slot
You can store QSO Recording, TX Voice Memory, pictures, QSOs and GPS log data. Firmware upgrades, Repeater lists and other personal settings onto a microSD card (up to 32 GB). This can then be uploaded into the ID-52E radio.
Micro USB Connector
The ID-52E has a Multi-function USB port as well as USB host function, for charging the Icom battery packs, PC Programming, read/write contents to the microSD card, Terminal/Access Point mode support, as well as CI-V control as well as audio.
IPX7 Waterproof and Tough Construction
IPX7 waterproofing and pro-grade construction make the ID-52E ideal for operating in harsh outdoor environments.
• 750 mW loud audio output power
• Improved heat dissipation efficiency for stable operation
• DV fast data mode uses data in place of voice frames
• QSO log in CSV data format
• Accessories for the ID-51E/ID-31E such as battery packs and microphones can be used
• DV/FM near repeater search function
• Voice recorder function
• External DC power jack
“A viewer asks: What size of gauge of wire should I use for my portable End Fed Half Wave EFHW antenna. 16 gauge wire seems to be bending my mas... Read more
Description: This 10-80 Meter Multiband FEA (Field Expedient Antenna) Kit enables you to customize your Alpha Multiband HF Antenna. The kit can then b... Read more
Expert Electronics MB1 In this video I demonstrate how to update your Expert Electronics (SunSDR) MB1, for both software (ExpertSDR2) and firmware (as... Read more
This video briefly shows how to setup and use the NanoVNA to sweep an antenna system (antenna, transmission line, transmatch, etc.) to measure its VSW... Read more
https://www.youtube.com/watch?v=abbSuqz59co Read more
Brand new from Buddipole is an updated version of their solar charge controller, dubbed the PowerMini2. The POWERmini 2™ is described as a DC Power Ma... Read more