“The Retevis RT52 may look quite familiar on the outside, it has the same dimensions and look as the Retevis’ RT3S dual band HT. In fact, just about every appearance between the RT3S and RT52 are identical. But the differences are apparent as soon as you turn on the radio radio. First off, you are greeted with a high contrast light colored text on a black screen. The second big difference of the RT 52 is the addition of dual Push to Talk operation.”
- Broadband digital two way radio
UHF: 400-470MHz / VHF: 136-174MHz - Dual PTT Operation
- Various Scanning Functions
- Single/Dual Standby Switch
- 4000 Channels(250 Zones, 16CH per Zone)
- VOX Function
- Power Save
- SMS Function
- Emergency Alert
- Talk Around
- 1.8″TFT Colorful Display and Customized Display
- Monitor
- Kill/Wake up
- DTMF
- TOT
- Squelch Control
- Lone Worker
- Direct or Repeater TDMA Tier II Modes (Hytera, MOTOROLA, Kirisun etc.)
- Voice Recording Option(Analog/Digital, Playback, Delete)
Technical parameters:
| General specification | |||
|
Frequency range |
VHF:136-174MHz |
Memory Channel |
4000 Channels |
|
UHF:400-470MHz |
Operating Voltage |
7.4V DC |
|
|
Frequency Stability |
±1.0ppm |
Operating Temperature |
-30℃~+60℃ |
|
Size（H*W*D） |
134x61x40mm |
Weight |
About 280g(Include in battery and antenna) |
|
Transmitter |
|||
|
Output power |
High:≤5W Low:≤1W |
Standby Current |
0.15A |
|
Transmit Current |
Analog≤1.6A Digital≤0.9A |
Modulation Distortion |
12.5KHz date and voice:7K60FXW<5% |
|
FM modulation Mode |
11K0F3E@12.5KHz /141K0F3E@20KHz |
FM Noise |
≥45dB@25KHz/≥40dB@12.5KHz |
|
Adjacent Power |
≤-65dB@12.5KHz |
||
|
Audio Response |
+1~-3dB |
||
|
4FSK digital modulation |
16K0F3E@25KHz |
Antenna Port Stray |
9KHz-1GHz:≤-36dBm |
|
Digital Protocol |
ETSI-TS102 361-1,-2,-3 |
|
|
|
Receiver |
|||
|
Analog receive sensitivity |
0.2µV@12dB SINAD |
Spurious Response |
≥70dB |
|
Digital receive sensitivity |
0.25µV (BER:5%) |
Intermediation(Wide/narrow) |
≥65dB |
|
Audio Distortion |
<5% |
Adjacent channel selectivity |
≤-60dB@12.5KHz |
|
Audio response |
+1 ～ -3dB |
Modulation Noise |
≥45dB@25KHz /≥40dB @12.5KHz |
$141.49
Equipment
500+ Watts in a compact package the size of the Elecraft K3. We are proud to introduce the KPA500: A 500-watt solid-state amp that integrates so well with your station, you’ll think it’s reading your mind. Exactly the s... Read more
Antenna
Jim makes and then shows his tunable half wavelength dipole antenna. Using an antenna analyzer, Jim finds the resonant frequency and the lowest SWR do not occur at the same frequency. Read more
Review
“You can now use your Yaesu FTM-100DR, FTM-400DR and the F2DR as a Wires-X hotspot (PDN) or IP radio without buying the HRI-200 or another C4FM radio. In this video I show how the new firmware update for the FTM-100DR brings new these... Read more
