For more than 4 decades, the name Ramsey Kits has been synonymous with some of the neatest and the greatest electronic products and hobby kits for the do-it-yourself hobbyist. In those 40+ years, we always thought “outside the box” when we designed a new kit, making us known worldwide as the number one hobby kit manufacturer.
…Therefore, following our well respected predecessors like Heathkit, KnightKit, Eico, and others in the past, we are discontinuing our Hobby Kit Group January 1, 2016.
This is a summary of the full statement that can be found on their main page, here. Besides the front page, I couldn’t find any other news about it on the tubes.
For now, there’s some inventory left selling on Amazon here.
In case you hadn’t heard of Ramsey Electronics and their kits, you can browse a snapshot of their site from Nov. 30, 2015 via the Internet Archive WayBack Machine here. Ramsey had over 400 kits for everything from Amateur Radio gear, Nixie tube clocks, PIC programmers, etc. Even very esoteric kits like one for controlling airport runway lights (which I almost bought for the hangar at the news helicopter I used to work in).
The hobby electronics & kit industry has been a tough market for a while. However some newer companies like SparkFun, Adafruit, etc., seem to have figured out a couple things that maybe Ramsey, Radio Shack, and some others may have not. In my opinion, these may be a few:
- Open Source – Many of the kit companies were just using designs from magazines, books, and other prior art sources, but in a closed source fashion. Even if the kits were designed in-house, most of the time schematics weren’t available unless you purchased the kit. For the companies that did make schematics or instructions available for download, the explanation of the circuits were usually still too technical. Which leads me to my next point.
- Documentation/Instructions – Many of the kits I’ve assembled, while having an explanation of the circuit, were too technical. My outlook was, if someone is assembling a kit, they probably don’t have any or much electronics background and need a very basic (layman) explanation of the circuit. Even better if there’s…
- Video – A video of the final kit, or maybe even an assembly video to show any “gotchas” is invaluable, in my opinion. Even if it’s just to show how the kit works vs. just reading the description on a product page.
- Social Media – Like it or not, social media is pretty much required for a business anymore. A lot of the kit & hobby electronics companies that have gone by the wayside either didn’t have any social media presence, or just never figured out how to utilize them.
- Community – All of the above four points lead to a community. Just like many of the defunct companies failed to have any of, or the right combinations of the aforementioned points, it lead to them not having a community. Just the old Seller/Buyer or Seller/Shareholder/Buyer relationship.
Fred Lloyd, AA7BQ – of QRZ.COM interviewed by Tim Duffy, K3LR at DX Engineering Read more
My MFJ-1886 Receive-only Loop Antenna was trashed by a large animal a couple days ago (See AD #328). In this video we disassemble it and test the prea... Read more
Hexbeam Finally and after many prayers and here the new Hexbeam with 40 meter band including 7 Bands! Note: The 40 meter band is not directional like... Read more
SPRINGFIELD, Mo. – Springfield’s amateur radio operators aimed to show Saturday why their hobby could be a lifeline in an emergency. The Southwest Mis... Read more
A short video about the Icom VE-SP1 desktop conference speaker microphone which enables a simultaneous voice conference in multiple locations by combi... Read more
Engineer to Study Ham Radio Project — Equipment Installation on Hold By Pauline Masson Read: Read more
Warning: file_get_contents(https://plusone.google.com/_/+1/fastbutton?url=https%3A%2F%2Fqrznow.com%2Framsey-electronics-shuts-down-its-hobby-kits-division%2F): failed to open stream: HTTP request failed! HTTP/1.0 404 Not Found in /home/qrznow/public_html/wp-content/themes/goodnews5/framework/functions/posts_share.php on line 151