10W/5W/2.5W/1W Selectable: The Radioddity GD-AT10G is a powerful handheld radio with a compact design, featuring selectable output power of 10W/5W/2.5W/1W and plenty of room for up to 200,000 DMR contacts storage, allowing bulk import via software.
UHF Dual-Mode Radio: It is a dual-mode UHF radio. You can switch between analog and digital (DMR Tier I & Tier II) operation modes at any time.
GPS Function: The GD-AT10G comes with a built-in GPS receiver used for APRS, which is for real time digital communications of information of immediate value in the local area. This makes it a ‘must go’ for any outdoor and overland communities. Note the ARPS supports Digital TX and Digital RX. Although it supports Analog TX, UHF band means no frequency on 144MHz.
Talker Alias Function: This function, also known as In-band Caller Alias, will allow your pre-set text such as your name or callsign to be displayed on the screens of all radios receiving a transmission, which is useful for radios shared by two or more users.
Large Battery Capacity & Crystal-Clear Sound: With its powerful 3100mAh battery, the Radioddity GD-AT10G supports up to 14 hours of continuous working time and 90 hours of standby time. You will be delighted by its crystal-clear audio sound when transmitting and receiving.
Review
Ham radio Frequency Chart
Ham radio Frequency Chart Graphical Frequency Allocations 2200 and 600 – meter bands General, Advanced and Amateur Extra class licensees are aut... Read more
Geochron 4K World Clock – Review
Geochron “For 50 years, Geochron made a classic, mechanical clock showing the time across the world as well as areas of light and dark. Well, th... Read more
Review and test of Buddipole Deluxe Antenna
Buddipole Deluxe Antenna Review This is the testing and review of the Buddipole Deluxe antenna available at Buddipole.com. The Buddipole™ Deluxe Packa... Read more
Elecraft KX1 & AX1: Dodging the rain at Lake James State Park
Dodging the rain at Lake James State Park Read more
Building a Motorhome Ham Station From Scratch by K6UDA
In the midst of packing for my DXpedition / SCUBA dive trip to San Salvador Island, I felt the need to start a series on designing and building a port... Read more
Equipment
![Kenwood TS 890S at HamNation [ Video ]](https://qrznow.com/wp-content/uploads/2018/05/TS-890S-l-265x168.jpg)
Kenwood TS 890S at HamNation [ Video ]
Gordon West WB6NOA interviews Kenwood Chief Design Engineer Toshio Torii JA6QXW on NEW Kenwood TS-890S during Hamvention 2018. Read more
IC-9700 Firmware Update
Download Type Firmware Model name IC-9700 Version Version 1.23 Update 2020/04/03 Major changes Changes from Version 1.21 Changed the screen drawing se... Read more
New! LAN-IQ SDR (Stand-alone SDR)
LAN-IQ SDR Features Stand Alone Software Defined Radio ● 30 kHz to 1700.00MHz continuous frequency range ● Direct sampling ● DDC – Digital Dow... Read more
Tech-out of the Xiegu XPA125B Auto Tuner + Amplifier
Today we take a look at the Xiegu XPA125B QRP Amplifier and Auto Tuner hooked up to the Icom IC-705. This amp will work with a variety of QRP rigs inc... Read more
Antenna
Light Beam Multi-band Antenna LBM-17M+20M
The Light Beam Multi-band Antenna has been developed for Hams who want one antenna which enables them to operate on multiple amateur bands. Bas... Read more
Radials or Not?
Joe, NE1JT, has a vertical dipole antenna and has a very simple question about it, and antennas in general. “Should ground radials be added?... Read more
Custom Antenna Insulator online .STL creator
Custom Antenna Insulator online .STL creator You can generate own insulator for 3D printing online – precisely tailored of your diameter Read more
The Take-off Angle Theory
“Kyle, W0AAV, is wondering if there is an optimal angle to put his vertical antenna or is the Take off angle not really important or is is more... Read more
8.5 DB gain for less than $40.00 – 50MHz Yagi
by W3GAS The Yagi is one of the simplest directional antennas you can build today. There are no moving parts, and the Yagi can be matched to 50 OHM v... Read more
App - Mobile
CommCat 4 for Radio Control and Logging!
CommCat 4 is a radio control and logging program for radio amateurs who share a passion for talking to other hams around the world. CommCat works with... Read more
Android APP – Morse Trainer for Ham Radio
Learn or improve Morse code with Morse Trainer. Now with Farnsworth speed and Koch method. If you are a ham radio (amateur radio) operator or just wan... Read more
The Android SDR App That Beats Them All! Supports RTL-SDR Airspy HackRF and Many More!
Android SDR App SDR MUST be plugged in before starting SDR++ and you MUST press refresh in the SDR source you’re using befor... Read more
EchoLink for iOS version 2.10.18 is now available
EchoLink for iOS version 2.10.18 is now available in the App Store. This is a 64-bit build that is fully compatible with iOS 10 and modern iOS devices... Read more
The RS-MS1I APP is now available via the iTunes store
Description Functional overview of the application DR functions You can use some transceiver’s DR functions. Share pictures Send and receive vo... Read more