QRP Labs new QCX+ QRP CW/WSPR transceiver kit

QRP Labs has just announced the QCX+ which as the name implies is an upgraded version of the very popular QCX line of transceivers

To date almost 10,000 kits have been sold, here’s a brief overview of the the differences and new features made to this popular Transceiver.

The QCX+ is the almost same circuit as the QCX, with two very minor changes. QCX+ runs the same firmware as QCX, and has identical operational and performance characteristics. QCX/QCX+ firmware will always be compatible with both the QCX and QCX+. The evolution of QCX to QCX+ provides several improved features in physical layout, as follows:

1) Physical layout of controls and connectors

2) Optional enclosure

3) Additional and changed connectors

4) More spacious PCB, more than double the board area, with less densely packed components, and more test/modification points

5) Improved heatsinking

6) Three minor circuit changes

7) No microswitch key

Price has gone up slightly to $55, still no other QRP Transceiver on the market today comes close to the features offered by the QCX+ at this price point.

PRELIMINARY INFORMATION

Note that the following is preliminary information. The pictured aluminium enclosure is a prototype only. It is subject to minor final changes. In particular, the anodizing step of the manufacturing will be done AFTER the drilling/cutting, therefore silvery raw aluminium edges will not be visible in the LCD cutout etc.

The QCX+ features the same circuit, same firmware and same operational characteristics as the amazingly popular QCX transceiver launched in August 2017. It is a 5W, single-band, high performance CW transceiver kit with WSPR beacon, and built-in alignment/test equipment. It is available for 80, 60, 40, 30, 20 or 17m bands. See below for the long list of features! This is a kit of parts that you assemble yourself. There are NO surface mount components to solder (two SMD ICs are already factory pre-soldered).

There is also a smart extruded anodized aluminium enclosure available, with laser-etched text and holes cut to fit the QCX+.

Please see QCX Frequently Asked Questions page for any queries you have. In case of any problems, please see the QCX trouble-shooting page.

Features

Easy to build, spacious 13 x 10cm main board, separate front panel board with all controls board-mounted
Professional quality double-sided, through-hole plated, silk-screen printed PCBs
Choice of single band, 80, 60, 40, 30, 20 or 17m
Approximately 3-5W CW output (depending on supply voltage)
7-16V recommended supply voltage
Class E power amplifier, transistors are bolted to the PCB as a heatsink, though heat dissipation is minimal
7-element Low Pass Filter ensures regulatory compliance
CW envelope shaping to remove key clicks
High performance receiver with at least 50dB of unwanted sideband cancellation
200Hz CW filter with no ringing
Si5351A Synthesized VFO with rotary encoder tuning
16 x 2 blue backlight LCD screen
Iambic keyer or straight key option included in the firmware
Simple Digital Signal Processing assisted CW decoder, displayed real-time on-screen
On-screen S-meter
Full or semi QSK operation using fast solid-state transmit/receive switching
Frequency presets, VFO A/B Split operation, RIT, configurable CW Offset
Configurable sidetone frequency and volume
Connectors: Power, 3.5mm keyer jack, 3.5mm stereo earphone jack, BNC RF output
Built-in test signal generator and alignment tools to complete simple set-up adjustments
Built-in test equipment: voltmeter, RF power meter, frequency counter, signal generator
Beacon mode, supporting automatic CW or WSPR operation
GPS interface for reference frequency calibration and time-keeping (for WSPR beacon)
CAT control serial data interface
Optional 50W PA kit
Optional Enclosure

Assembly and operating instructions

Pending – available soon

Firmware

The QCX/QCX+ firmware has undergone a continuous process of improvement, to add new features requested by QCX owners, since August 2017. If you have an AVR programmer you can update your firmware using the on-board programming header. The firmware version history and more information are on this page (click!).

QCX+ vs QCX – what are the differences, and new features of QCX+?

1) Physical layout of controls and connectors

QCX was a single board design, with all connectors and controls board-mounted. It was somewhat inconvenient to fit the board into an enclosure, since connectors were on the left and right sides, while the controls and LCD were all at different heights to the PCB.

In contrast, QCX+ is a two-board design with a conventional desk-top style vertical front panel carrying the LCD and controls; this vertical faux front panel PCB plugs into a horizontal PCB behind that contains the majority of the circuit. All the connectors are on the rear edge of the PCB making it much easier to fit the PCB into an enclosure.

An important addition in QCX+ is the locking push-switch on/off button on the front panel (bottom left).

2) Optional enclosure

No official QRP Labs enclosure was available for QCX, though BaMaTech created a nice aluminium enclosure, several 3D printed designs were published and even sold, and many constructors showed great creativity in producing beautiful enclosures for their QCX kits.

QCX+ is specifically designed to fit a custom-manufactured black anodized alumnium enclosure measuring 106mm wide by 55mm high and 146mm deep. The enclosure is supplied with four self-adhesive feet. It is laser-etched and cut and drilled to match the QCX+ PCB.

The main QCX+ PCB slides into the extruded aluminium enclosure body along PCB mounting grooves at the sides of the aluminium extrusion.

The photographs on this page are preliminary, they are a prototype. Changes in the final enclosure will be:

Anodizing step will be performed AFTER the cutting/drilling, this avoids the silvery raw aluminium visible in the LCD cutout for example
Final enclosure will have larger text on the front panel
Screw holes will be moved slightly
Power switch (bottom right button) knob is different in the final version

3) Additional and changed connectors

QCX+ features a 2.1mm barrel power connector for DC power input (compared to the two screw terminals on QCX); the QCX+ transceiver also has two additional 3.5mm stereo jack socket connectors, for PTT (to fit the QRP Labs 50W QCX amplifier) and CAT control 38400 baud serial port.

4) More spacious PCB, more than double the board area, with less densely packed components, and more test/modification points

QCX was on a single 10 x 8cm PCB. The main PCB in QCX+ is 13 x 10cm, which is a 63% increase in board area, and additionally the controls and LCD are moved off onto their own front panel PCB. Together with the front panel, in total the area of QCX+ PCBs are more than 2.2x that of the QCX PCB. This increase in space means that the assembly of QCX+ is easier, because component density is lower.

All QCX+ PCB traces are 16 mil (thicker traces than the 12 mil size used in QCX).
All resistors, diodes and inductors that were mounted vertically in QCX, are now laying horizontally in QCX+
There are numerous test points at the input and output of each stage of QCX+, and these can also be used to connect other circuits when making modifications to your QCX+ or experimenting
Four mounting holes near the corners of the main PCB, together with the large amount of space in the QCX+ enclosure, make it possible to add further PCBs experimentally as you wish, for example a battery compartment etc.

6) Three minor circuit changes

Aside from the two additional connectors, and the locking push-button on/off switch, there are also three more minor circuit changes in QCX+:

An additional 0.1uF supply decoupling capacitor has been added, for even better supply decoupling
C24 has been increased from 10uF to 470uF, which further reduces the transmit/receive switchover click
Additional 10K resistor from IC3 pin 13 to pin 14 as documented here http://qrp-labs.com/qcx/qcxmods/ptt.html

7) No microswitch key

The only loss in the QCX+, is no more microswitch key on the board… that just doesn’t fit properly on a vertical front panel and main horizontal board, with the enclosure option et

ARRL Review of QCX in August 2019 QST issue

Paul N1II reviewed the QCX transceiver in the August 2019 issue of the ARRL monthly publication QST. Quoted performance for QCX+ is expected to be equivalent to QCX, since there are no component changes and great attention has been given to PCB layout in both QCX and QCX+.

CLICK HERE to read the PDF (497K file)

More Info:

https://qrp-labs.com/qcxp.html