DESCRIPTION
> High contrast OLED display
> Power management includes current and voltage readout and user-managed DC outputs
> Built-in UPS creates seamless transition between DC power and backup battery
> Dual USB charging outputs for peripherals
> Visual and audible indication of low battery voltage or pending disconnect
> Maximum current handling capacity – 40 amps
Its rugged design works well in both field, mobile and base station applications providing both automatic power changeover in the event of loss of DC power as well as built in battery charging capability for batteries with capacity up to 100Ah.
Multiple overload protected outputs and built in USB charger ports make this a powerful combination of features simplifying the station, improving reliability and reducing the clutter of messy and inefficient DC wiring. The interconnections between all of these functions are handled internally within POWERplus.

Here is what POWERplus does:
• UPS
o Automatic changeover between DC power and emergency backup battery
• BATTERY CHARGER
o Multi-chemistry 3 and 4 stage high efficiency charger
o Adjustable charge rate and current monitoring
• USB CHARGER
o Dual USB charger outputs for phone/tablet/LED light charging
o Current limited outputs
• POWER MANAGEMENT
o Automatically disconnects the radio if the battery voltage is too high to protect your radio if something goes wrong with your DC Input.
o Monitors the battery and alerts you if the battery is getting too low and will even automatically disconnect to protect the battery from deep discharge.
o User adjustable DC output current limits
o Manual or automatic control of output groups
• POWER REPORTING
o Realtime monitoring of DC power supply and battery voltage and current
o Realtime monitoring of output loads
o Graphical indication of instantaneous load current
• ALARMS
o Visual and audible indication of low battery voltage or pending disconnect
Weight:. 11.3 ounces
Size: 8″W x 3.2″H
Antenna
New! Vertical Loop Yagi ( 6 to 40m ) – Ultra Beam
Vertical Loop Yagi See More : Link Read more
Cushcraft R9 covers 6,10,12,15,17,20,30,40,80 Meters
This multiband vertical designs provide 9 band coverage encompassing the 6, 10, 12, 15, 17, 20, 30, 40 and 80 meter bands. Cushcraft achieved a majo... Read more
Squalo antenna for 6m by PA3HCM
Introduction – Squalo antenna Adri PA0RDA, a friend of me, is trying to do some DX on 6m for a while now. His antenna position is... Read more
Full Size Mega Loop Antenna 6 to 160m
“Nearly two years ago, we decided that we needed a better antenna for all band operation to replace our traditional use of wire dipoles.... Read more
CrankIR Series Antenna Vertical
Steppir Antenna Verticals are the only true ¼ wave continuous coverage antennas available for the HF bands. The SteppIR technology has had a pr... Read more
The X7 Triband Yagi – Cushcraft
X7 BIG THUNDER TRIBANDER YAGIThe X7 Triband Yagi is geared to set new standards in both radiating performance and mechanical reliability. The p... Read more
Review
Yaesu FT-891 Initial Impressions
“Introducing the Yaesu FT-891! My new portable HF Transceiver for Ham Radio! The FT-891 is a 100w rig for HF-6m at just shy over 4 lbs. A super... Read more
AmateurLogic 121: Hamfests from Huntsville to Tokyo
In this episode, we cover a few new products and fun at Huntsville Hamfest and Tokyo Hamfair. Read more
Getting Started On Ham Radio Satellites With Sean KX9X
Getting Started On Ham Radio Satellites With Sean KX9X Read more
Raspberry Pi Powered HF Radio in an Ammo Can GoBox
“Hello Operators. Topic of the day is the Raspberry Pi 3B+, and how I’m using it for amateur field communications. During May 18-21, I spe... Read more
Digital Cables and Connectors we see and use in the Ham Shack
“Ken, “Digital Dorsey”, KA8OAD talks about various types of USB, HDMI and DVI cables used around the radio shack.” Read more
ANNOUNCEMENT – FTM-400XD/FTM-400D/FTM-100D PDN
Announcement about the new firmware release for the FTM-400XD, FTM-400D, FTM-100D mobiles radio and PDN functionality. Read more
App - Mobile
Antenna Tool App – Android
A tool to help ham radio, CB, and other radio users to create antennas of various types. Calculations available for dipole, vertical (1/8, 1/4, 3/8, 1... Read more
EchoHam version v2.10 has been released
EchoHam allows Amateur Radio operators to use the Echolink network from their Mac. You must be a licensed Amateur Radio operator to use this software.... Read more
QRZ.com App for Android now in Beta Testing
The updates to QRZ’s Android App, formerly known as QRZDroid have been released and are available to those who are interested in trying it out.... Read more
Koch Morse Trainer Pro – Android App
Take your morse code to the next level with Koch Morse Trainer Pro. The only trainer that supports prosigns (procedural signals) and non-english cha... Read more
DroidRTTY – RTTY for Ham Radio App Android
Ham Radio App DroidRTTY is an application to decode and encode Ham Radio RTTY with the build in microphone/speaker or wired to your radio. A wa... Read more
Tutorial – Using the new routing function in RT Systems featuring RFinder
Once again RFinder and RT Systems have partnered to kick radio programming up a notch. This tutorial will show you how to get the most o... Read more