PowerMaster II Station Monitor, VSWR & RF Power Meters

The PowerMaster II from the Labs of Array Solutions

A Wattmeter that is Outstanding in Functionality with NIST Traceable Accuracy

Some of the Many Features

	ALC-1 – ALC protection option, shuts down your transmitter fast but yet allows ALC normal operation
	FASTEST Bar graph on the Market, makes tuning an amp or a tuner a joy, faster than an analog meter. So fast it can catch the first “dit” at 99 WPM and even show you if your rig has a RF spike problem. Why mess around with other meters that have have had display failures?
	Displays VSWR, Power, and Bar graph at the same time.
	Support for BLIND Hams via www.hampod.com
	Runs with or without a PC connected to it. That means there are no programming hassles and issues setting this meter up. Runs right out of the box.
	Accuracy typically better than +/- 3% over frequency and temperature ranges
	Commercial couplers available for VHF and UHF commercial bands
	Peak Hold Modes – programmable for fast(1/2 sec), medium, slow, and Long ( 5 sec) for CW, SSB, data, FM, whatever you’re sending!
	Two Models – 3 kW and 10 kW – standard coverage is 160 through 6m (1.8 to 54 MHz)

Separate Display and Coupler/Sensor boxes– Sensor can be remotely located at your amp or in your mobile unit this also keeps the high power cables away from your radios, audio equipment, PCs etc. No nasty RF cables on top of your desk or radio to cause RFI and other clutter issues! The coupler is using DC only, no RF is sent to the meter. A good thing!
bullet
Remote use, even 100 feet of cable between sensor and display has no drop in power measurement. None.
bullet
Multiple couplers on one display – the PM II supports two couplers without any external adapters.