OM1002+ OM Power Solid State amplifier for 144 MHz VHF band

Posted date: June 08, 2015in: NewsNo Comments

General description of the OM1002+
solid state amplifier for 144 MHz VHF band

The OM Power model OM1002+ is a single band, solid state amplifier, designed for duty operation on 2 meter’s amateur band with all modes and no time limit. It is equipped with a new Freescale high rugged N-channel double MOSFET. This amplifier is characterized by compact design, small size and a low weight
Specification of OM1002+:

Frequency coverage:	144 – 148 MHz Amateur Band
Power output:	1000W in CW 800W in SSB (linearity), RTTY, AM, FM and digi modes, 50% duty cycle
Input Power:	10 to 15 W for full output power 1000W
Input impedance:	50 Ohm, VSWR < 1,3 : 1
Power Gain	Typically 19 dB
Output impedance:	50 Ohm unbalanced
Maximum output SWR:	1,9 : 1 for full output power 1000W
SWR protection:	Automatic switching to STBY, when reflected power is 100W or higher
Intermodulation distortion:	– 32 dBc
Suppression of harmonics:	< -70 dBc
MOSFET:	MRFE6VP61K25HR6
Cooler:	1 axial fan (cooler) + 1 axial fan (power supply)
Supplying:	100 – 250VAC , 50 – 60 Hz
Power Supplies inside:	50V DC switching mode PS 12V DC for logic and protection circuits
Size:	318 mm x 144 mm x 362 mm [12.5” x 5.7” x 14.3”] (Width x height x depth)
Weight:	9.5 kg ( 20.9 lb )

LAN Connection

Remote unit is interfaced to LAN via XPORT made by Lantronix (type XP1001000-05R). More info can be found atwww.lantronix.com.

Default factory settings of XPORT are:

IP address: 192.168.1.233
Mask: 255.255.255.0
Gateway: 192.168.1.1

These are strictly default settings. You can modify any of these by going to XPORT web GUI via your web browser. We do not recommend changing any other parameters of the XPORT interface as loss of communication can be caused by doing so. There is no default user name or password. It is highly recommended to secure web interface with username and password.

For remote control over LAN and monitoring special software is needed. It is available free of change, it can be downloaded from the following address:

http://www.om-power.com/download/UHF_PA_Manager_v1.10-setup.rar.