OM-Power 4001A Fully Automatic
HF Amplifier
General description and the advantages of the OM4001A amplifier
The OM Power model OM4001A is an automatic power amplifier, designed for use on all short wave amateur bands from 1.8 to 29.7 MHz (including WARC bands) and all modes. It is equipped with a two pieces of ceramic tetrode FU728F.
The advantages of OM4001A:
-
Full compatibility with
- – ICOM
- – YAESU
- – ELECRAFT
- – Ten-Tec Orion
- – Kenwood
- – Icom transceive protocol using by microHAM devices –CI-V output (MK II, MK2R, MK2R+, etc)
- – Flex Radio Series 6xxx
- – Apache Labs Anan
- RF sensitive Band and Frequency switching, for use with radios which do not have CAT
- Automatic switching between bands
- Automatic tuning with the band according to segments
- Automatic switching of band pass filter – BAND DATA output compatible with YAESU radios (BCD code)
- Automatic switching of the antenna switches – maximum number of antennas is 10, controlled by BCD output code
- Remote control via PC Windows Application
Specification of OM4001A:
Frequency coverage: | Amateur Bands 1.8 – 29.7 MHz including WARC |
Power output: | 4000+ W in SSB and CW on HF bands, 3000W in RTTY and DIGI modes |
Input Power: | Usually 40 to 60W for full Output Power |
Input Impedance: | 50 Ohm, VSWR < 1.5 : 1 |
Power Gain: | 17 dB |
Output Impedance: | 50 Ohm unbalanced |
Maximum Output SWR: | 3:1 |
SWR protection: | Automatic switching to STBY, when reflected power is 350W or higher |
Intermodulation distortion: | -32dB below nominal output |
Suppression of harmonics: | < -50 dBc |
Tubes: | 2x FU728F Ceramic tetrode |
Cooler: | Centrifugal blower + Axial blower |
Response speed of AUTO tune: | less than 0,5s within same BAND ,less than 3s if out of BAND |
Power supply: | switchable 2 x 220/230/240V – 50 Hz one or two phases |
Transformers: | 2 pcs of toroidal transformer 3kVA |
Dimensions: | 485 x 200 x 455mm (width x height x depth) |
Weight: | 46 kg |
Protection circuits: | – VSWR too high |
– Anode current too high | |
– Anode voltage error | |
– Screen current too high | |
– Screen voltage error | |
– Grid current too high | |
– Grid voltage error | |
– Heating voltage error | |
– Mistuning of PA | |
– Temperature too high | |
– Soft start for protecting your fuses | |
– “switch-on blocking “ at opened amplifier | |
Indications: | 4.3″ colour touch screen display |
Features: | High level of protection |
Memory for faults and warnings, easy maintenance | |
Automatic set-up anode current (BIAS) – no need to adjust manually after changing the tubes | |
Three programmable working modes of the axial blower | |
Full QSK with silent relay | |
Many operational parameters to display | |
The smallest and lightest 4000 W Power Amplifier on the market |
LAN Connection
Power amplifier is interfaced to LAN via XPORT made by Lantronix (type XP1001000-05R). More info can be found atwww.lantronix.com .
Default factory settings of XPORT are:
IP address: 192.168.1.222
Mask: 255.255.255.0
Gateway: 192.168.1.1
Our website will be updated soon with more details
This is the review of a Mini portable PWR and SWR meter with built-in battery and High SWR warning buzzer. There are also the Xiegu X6100’s outp... Read more
“Let us understand what happens if you have a hill or mountain in the way of your radio signal because I recently published a video showing you... Read more
“This video is a response to a video I saw by @NotaRubicon Productions where he claims that GMRS is better than Ham Radio. I found the video fun... Read more
Review
Mini DIGITAL PWR / SWR meter review
Radio Signals: What happens if there’s a hill in the way?
10 Reasons Why GMRS is NOT Better Than Ham Radio
23cm Band After review and approval by the IARU Region 1 Executive Committee and the IARU Administrative Council a presentation on preliminary Amateur... Read more
SHF-P1 For more than half a century, Icom has created new technology for Amateur Radio. Our engineers have a new project, “Icom SHF Project – Super Hi... Read more
Icom Japan have been working on a concept of a new radio looking to revitalize the use of the SHF (Super High Frequency) bands. Recently a concept mod... Read more
VHF
Amateur/RNSS Coexistence – 23cm Band
World Debut of the SHF-P1, 2.4 GHz / 5.6 GHz Concept
The ULTIMATE Challenges Facing the Icom SHF Project
Due to some inquiry by Eric, KB0YDN, I decided to make this video discussing the incident of the Ham Firefighting Interference in Idaho Last year. Thi... Read more
Here we take a look at the RTL433 Plugin for SDR Sharp, making it easy to decode ISM RF Packets. https://github.com/marco402/plugin-Rtl433-for-SdrShar... Read more
IARUMS newsletter IARU Monitoring System (IARUMS) Region 1 newsletter reports an increase in unidentified intruders in the amateur radio bands followi... Read more
News
Use your Privileges Properly – Ham Radio
ISM Packet Decoder Plugin For SDR Sharp – RTL 433
Increase in unidentified intruders