New ! ICOM A120 VHF Air Band Transceiver

VHF Air Band Mobile Radio

Icom’s A120 air band mobile introduces two new features: Active Noise Cancelling (ANC) and Bluetooth® capabilities. The newly added built-in ANC reduces background noise and is effective in extremely noisy airport environments. The automatic noise limiter (ANL) reduces pulse-type noise such as engine ignition. Insert the optional UT-133 Bluetooth® unit and connect a third-party wireless Bluetooth® headset.

This unit is great for any mobile application and it’s available in a base station. Both are built to mil spec for superb reliability!

Output power:		36W (P.E.P)
Frequencies:		118.000-136.992MHz
Channel spacing:		8.33/25kHz
Channels:		200 with 12 character channel names
LCD display:		Dot-matrix with alphanumeric characters & icons
Waterproof rating:		IP54 dust protection & water resistant
Mount option:		Mounting bracket included

ON-hook scan and dualwatch functions

The ON-Hook scan function automatically starts scanning when the hand microphone is hooked on the microphone hanger. When you take the microphone OFF hook, the scanning stops at the priority channel or displayed channel. The Dualwatch function checks the priority and operating channels alternatively.

Side tone function

When using a third-party headset with the optional OPC-871A headset adapter, the side tone function allows you to monitor your own transmitted voice via the connected headset. Even when using a hand microphone, your voice can be monitored from the headset.

Additional features

Compatible with both 12V and 24V systems
Dualwatch and priority scan functions
Power on password protection
CI-V commands for external control
Connect with other radio devices with the VE-PG3 RoIP gateway

Specifications

General
Frequency range (Tx/Rx)	118.000–136.992MHz
Channel spacing	25kHz/8.33kHz
Type of emission	A3E (AM)
Number of memory channels	200 channels
Antenna connector	M type (50Ω)
Power supply requirement	13.75V/27.5V DC
Current drain (at 13.75 V DC) Transmitting Receiving	5.0A (maximum) 4.0A (at AF max.), 0.5A (at stand-by)
Operating temperature range	-30°C to +60°C;
Frequency stability	±5ppm (–30˚C to +60˚C)
Dimensions (W×H×D, Projections not included)	161×45×193 (mm); 6.34×1.77×7.6 (in) (approximately)
Weight (approx.)	1.5kg; 3.3lb

Transmitter
Output power (at 13.75V) (Carrier Power)	9.0W typ.
Modulation	70% to 100%
Spurious emissions (* Harmonics/Non-harmonics, 30MHz–1GHz)	Less than 60dB
Microphone impedance	600Ω

Receiver
Intermediate freq.	38.85MHz/450kHz (1st/2nd)
Sensitivity (pd)	1 μV (6dB S/N)
Selectivity 8.33kHz 25kHz	2.778/7.37kHz (6dB/60dB) 8/25kHz (6dB/60dB)
Spurious response	More than 74dBμ
Audio output power Internal SP (8Ω load) External SP (8Ω load) Headphone (500Ω load)	10% distortion, 60% modulation) 1.5W typical More than 10W More than 100mW

Measurements made in accordance with FCC Part 87 for USA version or EN 300 676-1 for Europe version. All stated specifications are subject to change without notice or obligation.

Applicable U.S. Military Specifications

Icom makes rugged products that meet MIL-STD requirements and strict environmental standards as follows:

Standard	MIL 810G
Standard	Method	Procedure
Low Pressure	500.5	I, II
High Temp.	501.5	I, II
Low Temp.	502.5	I, II
Temp. Shock	503.5	I-C
Solar Radiation	505.5	I
Humidity	507.5	II
Vibration	514.6	I
Shock	516.6	I