AURSINC Vector Network Analyzer 50KHz -900MHz HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart

This is a DIY product that provides perfect vector network measurement capabilities, tiny and handheld, stand-alone with 2.8-inch LCD display, portable with battery powered or USB powered
The improved frequency algorithm can use the odd harmonic extension of si5351 to support the measurement frequency up to 900MHz. The 50535-300MHz frequency range of the si5351 direct output provides better than 70dB dynamic, The extended 300M-600MHz band provides better than 60dB of dynamics, and the 600M-900M band is better than 50dB of dynamics
The default firmware main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
The metal shield is designed to reduce the external interference and improve the measurement accuracy
Package include NanoVNA host (with battery) x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1

Product description

Technical Data
● Display: 2.8 inch TFT (320 x240)
●RF output: -13dbm (maximum -9dbm)
●Port SWR: < 1.1
● Display: 2.8 inch TFT (320 x240)
● Size: 54mm x 85.5mm x 11mm
●Weight: 63 grams
● PCB: 50mm x 68mm x 10mm (without connector, lever switch)
● Measurement frequency: 50KHz ~ 300MHz (50KHz -900MHz (default firmware), enable extended firmware)
● Measurement range: 70dB (50kHz-300 MHz), 40dB (300M-900MHz, enable extended firmware)
● USB interface: USB tyoe-C communication mode: CDC (serial)
● Power: USB 5V 120mA, can use battery powered, maximum charging current 0.8A (battery Not included )
● Number of scanning points: 101 (fixed)
● Display Tracking: 4, Marking: 4, Setting Save: 5

Package list
1x NanoVNA host (with 500mAh battery)
1x USB Type-C data cable
2x 30mm SMA male to male RG174 RF cable
1x SMA simple calibration kit
1x SMA female to female connector