Self-tightening silicone rubber tubular gasket for our cables Ø 5,4 (.212”) or 7,3mm (.287”) or 10,3mm (.400”) or 12,7mm (.500”), matched to any one of our related connectors and adapters (Except 7/16 and right-angle connectors if installed before inserting it).
M&P-Silicone-Seal-L: reliable optimal tubular gasket that quickly seals the male-female connection, or connector-adapter-connector, tightly, hermetically, and seamlessly. No flame or heat is required.
It is also handy as a strain relief, for increasing the tensile strength between cable and connector!
The M&P-silicone-seal is factory expanded and assembled onto a removable supporting plastic core. The pre-stretched M&P-silicone-seal-L, as the core is unwound, (from the inside), shrinks to form a thick and tight tubular gasket. Retains its resiliency and pressure even after years of aging and exposure to Ultra-violet rays, acids, condensation and harsh environments, with operating temperature range -60℃ ～ 90℃ (-76°F～194°F).
Fiammability V-0 burning stops within 10 seconds on a vertical specimen, drips of particles allowed as long as they are not inflamed.
How to use:
1) Once the connectors have been assembled on the two cable sections to be connected, insert one of them inside the M&P-Silicone-Seal-L and let it slide sideways over the cable jacket.
2) After tightening the connectors to each other, make the M&P-Silicone-Seal-L slide over the connectors to be protected.
3) Then, while holding the M&P-Silicone-Seal-L in place, pull the protruding strip you can find inside one end of the white supporting plastic core (following the direction of the red arrow). Make sure the black silicone rubber placed over the plastic core, is well centered over the connectors to be protected, as this operation is not reversible. See also our video on the Messi & Paoloni YouTube® Channel which can also be reached via the QR CODE attachment.
4) By continuing to pull the strip (which will come off forming a free spiral), the black silicone rubber, deprived of its plastic core support, will shrink, settling permanently on the cable and connectors, embedding them very tightly.
This high-speed operation, which does not require any flame or heat, is completed, allowing you to operate in cold and windy environments or on top of towers without worries and assuring a professional and durable result!
Product dimensions (before shrinking): 14,5cm x 3,5cm
Ameritron’s Remote Coax Switch lets you remotely switch up to five separate antennas using one inexpensive small control line (like standard telephone... Read more
The Rig Expert Stick Pro is an antenna analyzer that will cover HF and 2 meter and 70 centrimeter bands. Frequency range: 0.1 ~ 600 MHz Freq... Read more
Expert Electronics MB1 In this video I demonstrate how to update your Expert Electronics (SunSDR) MB1, for both software (ExpertSDR2) and firmware (as... Read more
(4K UHD Version 60fps) Read more
“Faith Hannah (AE4FH) and Hope (KM4IPF) are planing to make a mini DXpedition to the Dry Tortugas in December 2018 and also plan to work the RSG... Read more
Here are all the links- http://goo.gl/FgPgwH You asked for it! Well, one of you did. In this video we take the Midland Micro Mobile GMRS radio... Read more
“In this video is almost all the Rigexpert antenna analyzers, thanks to GigaParts.com for letting me borrow them all. I will be making some vide... Read more
MTR-4B V2 Photos COMING SOON “The Mountain Topper” The LnR Precision MTR transceivers are designed to be efficient portable CW rigs. Whether climbing... Read more
Icom has released updates for its latest range of Amateur radios. The updates are available for the IC-705, IC-7300 and IC-9700 SDR transceivers. The... Read more
AR5001D 40kHz-3.15GHz Cellular frequencies blocked on USA version; unblocked version available to qualified entities, documentation required. Download... Read more