Mobile Antenna Model 100A-HP
When properly installed on your vehicle the Model 100A-HP will provide continuous coverage from 3.2 to 29 MHz with the supplied 6′ whip.
The Model 100A-HP like all the Tarheel Antennas is without a doubt the best built, the best looking, best performing, highest power rating motorized antenna for it’s size and design on the market.
All of our antennas come with the sensors already pre-installed so if you decide to add one of the auto controllers (SDC-100 Simple Controller, SDC-102 Programmable Controller, Turbo Tuner) now or later everything is ready.
What makes our antennas stand above the rest is all of our CNC machined components are either aircraft aluminum or stainless steel and blueprinted, meaning you can take 100 antennas apart and mix up the parts then reassemble them and they all work the same. Our coil form is approximately 2″ in diameter and made of fiberglass. The other antenna builders know fiberglass is better but they choose not to use it because of the expense and difficulty in machining. We use 14 gauge wire for high power capability wound at eight turns an inch for maximum efficiency. The decoupler we use is CNC machined for tight tolerances with custom fingerstock designed to contact 3 turns of coil all the time with over 25 lbs. of combined contact pressure. With this design you can run up to 1.5 Kw P.E.P trouble free. It’s so superior to anything else on the market.
The Pittman 12 volt commercial grade gear motor is very durable and very quiet while receive tuning.
Our weather shield is made of LexanTM. This is the same stuff used on racecar windshields and even used to make bulletproof windows.
The Model 100 comes in your choice of colors (Black, White, Red or Silver) using the Dupont Imron 5000 or Powder Coat Paint System. And folks this is not spray paint in a can. With this you get a finish that looks as glossy and last as long as the paint on a new vehicle.
That’s just some of the effort that goes into a Tarheel Antenna. You won’t be disappointed, I GUARANTEE IT!
The antenna is a plug & play system. Included is the antenna, manual switch box, 20 ft. of control cable, ferrite decoupling core, base matching coil, 3/8-24 stud, connectors, fuseholder and fuse.
The warranty is simple: For the 1st 30 days if for any reason you are not completely satisfied, return the antenna for a full refund less the shipping charges. The antenna has a ONE YEAR NO MATTER WHAT WARRANTY to the original owner. If for any reason (other than damage due to negligence, improper use or unauthorized disassembly) your Tarheel Antenna fails to perform due to quality or workmanship Tarheel Antennas, Inc. will at our discretion either repair or replace at no charge for parts or labor. Shipping charges are your (the customer’s) responsibility to and from Tarheel Antennas’ repair shop.
Any questions, don’t hesitate to contact us via phone or e-mail us at sales@tarheelantennas.com.
$499.00
ANTENNA SPECIFICATIONS
Lower Mast Length — 3 ft.
Frequency Coverage with 6ft. whip — 3.2 to 29 MHz
Power Rating — 1.5 Kw P.E.P.
Typical SWR — 1.5 to 1 or less
Total Height with 6ft whip at 29 MHz — 9’4″
Total Height with 6ft whip at 3.2 MHz — 11’4″
Weight — 8 lbs.
“ “Introduction This page describes the design and construction materials I used to build a coaxial cable trap. A coaxial cable tr... Read more
The winning article for the June 2018 QST Cover Plaque award is “Get on the Satellites for ARRL Field Day” by Sean Kutzko, KX9X. The QST Cover Plaque... Read more
“I’m reviewing the new MFJ-2289 Big Ear Portable rotatable dipole antenna this week. I’ve switched things up just a bit and I’... Read more
Hybrid SDR Configuration In addition to the Narrow band SDR receiver, that boasts overwhelming Basic Performance, the Hybrid Configuration Digital Pro... Read more
By: John Doetkott (ABC 6 News) — We like to recognize those first responders who are quick to react to an emergency, but those behind the... Read more
http://www.alphaantenna.com The Alpha Loop http://chameleonantenna.com The CHA-P-Loop http://www.alexloop.com My Alex Loop Antenna http://www.elecraft... Read more
500+ Watts in a compact package the size of the Elecraft K3. We are proud to introduce the KPA500: A 500-watt solid-state amp that inte... Read more
A 62-year-old Union Dale, Pennsylvania, radio amateur — Leland L. “Lee” Parsons III, N3LPJ — was killed on June 14 during a tower installation project... Read more
If all goes according to plan, NASA astronauts Bob Behnken, KE5GGX, and Doug Hurley will make US space history today [May 27], as human spaceflight re... Read more
A look at a simple superhet receiver designed for CW reception. Describes each stage and demonstrates the homebrew crystal filter in operation. A 7 MH... Read more
Recent Posts
Building Coaxial Cable Traps by W8WWV
KX9X Wins the June QST Cover Plaque Award
MFJ Big Ear Portable Dipole Review – K6UDA Radio Episode 25
Yaesu FTDX101D First Look
Radio Operator Honored For Service
Alex Loop vs CHA-P-Loop vs Alpha Loop Whats best for you? K6UDA Radio Episode 33
Elecraft KPA500 Compact 160-6 M Solid State Amplifier
Pennsylvania Radio Amateur Dies in Tower Installation Mishap
One Radio Amateur Aboard Historic SpaceX Launch
Anatomy of a homebrew 40m superhet receiver
Warning: file_get_contents(https://plusone.google.com/_/+1/fastbutton?url=https%3A%2F%2Fqrznow.com%2Fmobile-antenna-model-100a-hp-3-2-to-29-mhz%2F): failed to open stream: HTTP request failed! HTTP/1.0 404 Not Found
in /home/qrznow/public_html/wp-content/themes/goodnews5/framework/functions/posts_share.php on line 151
![Real-time Radio Spectrum Map Database Demo [ Android App ]](https://qrznow.com/wp-content/uploads/2021/10/maxresdefault-3-1-90x60.jpg)
![Real-time Radio Spectrum Map Database Demo [ Android App ]](https://qrznow.com/wp-content/uploads/2021/10/maxresdefault-3-1-180x120.jpg)
