There are no ads, please add some
General (exclusive features in red)
* Bright, High Resolution 5″ Color TFT Display
* 32-bit Main Processor
* Graphics and Audio coprocessors
* (8)16-bit ADCs with Adjustable Oversampling
* Low Distortion Custom Digital Test Signals to Aid in
Rig & Amplifier Adjustments using WFM and Spectrum
Displays.
* Native USB Interface – No Drivers Needed
(not needed for normal operation)
* Flash Upgradeable
* Fast Screen Refresh of up to 50Hz
* 12VDC Operation
* Interface to Rig is Through Remotable RF Couplers
* Provides Everything You Need to Know About
the Quality of Your Transmissions
* Size: 8.0″ W x 4.4″ H x 6.0″ D
Watt / SWR Meter
* Couplers for HF, VHF, UHF… Power up to 10KW
* Up to 4 Couplers with Simultaneous Sampling & Auto-Ranging
* NIST Traceable Calibration
* Large Numerals for Peak Hold and SWR
* Simultaneous Bargraphs for Instantaneous
Peak Pwr, Average Pwr & SWR
* SWR & Power Alarms w/ Adjustable Set Points
* SWR Protection Relay Jacks for 2 Amplifiers
* Additional Interface Available for 2 More Amplifiers
Waveform Monitor Scope
* Full screen Waveform, Trapezoid & Scope Displays
(Trapezoid requires two couplers)
* Adjustable Sweep with Memory.
* Presets for SSB, CW, PSK & 4 User Selections
* 5 Vertical Scales per Channel with Memory
* Three “Split-Screen” Displays which pair up Waveform
w/ Power/SWR, Trapezoid or AM Modulation Display
(w/ Bargraphs/Readouts for Positive & Negative Peaks)
* Touch Screen Cursors for Measuring Time Intervals & Levels
* Freeze Button to Facilitate Touch Screen Measurements
Spectrum Display
* Displays Modulation Spectrum of Transmitted Signal
* Adjustable Span & Averaging
* IMD Readout for Two Tone SSB, PSK
* Linear and Log Frequency Scales
* Adjustable Vertical Reference with 30 dB Range
* 18 bits Effective Resolution
* Up to 90dB Range
* Touch Screen Cursors for Measuring Frequencies & Levels
Important notice for LP-100(A) owners… LP-500 WILL NOT replace the LP-100A. The LP-100A
will continue to be our main product with some important features not provided in the LP-500.
While the LP-100A couplers look similar to the LP-500 couplers, they are completely different
and therefore not compatible.
See More: Link
