| Download Type | Firmware |
|---|---|
| Model name | IC-705 |
| Version | Version 1.27 |
| Update | 2022/05/20 |
| Major changes | Changes from Version 1.26Improved to enable forcing an All Reset by connecting an external power source (*) while holding down [RIT/ΔTX] and [XFC], even if you cannot turn ON/OFF the transceiver by using the [POWER] key. * First, disconnect any external power supply, battery pack, and USB cable, and then reconnect any one of them. |
| Note | You cannot revert to firmware version 1.24 or earlier on the serial numbers listed below, which have firmware version 1.26 or later installed.IC-705 #32: Serial number 32001001 or later IC-705 #33: Serial number 33001001 or later IC-705-T #36: Serial number 36001001 or later IC-705 #37: Serial number 37001001 or laterPlease note on the models listed above, if you revert to firmware version 1.24 or earlier, the audio will not be correctly output. The CS-705 programming software used with this firmware can be downloaded here.To update the firmware1. Download and unzip the firmware data (for example, 705E127.dat) and copy it into the “IC-705” folder that is on your microSD card.2. Insert the microSD card with the firmware data into the transceiver. 3. Update the firmware.3-1. Display the SD CARD screen in the Menu. 3-2. Touch “Firmware Update” on the SD CARD screen to open the FIRMWARE UPDATE screen.3-3. Touch [▼] to scroll to the end of the screen to read all the precautions, after you read and agree with all the precautions, touch [YES]. 3-4. The confirmation dialog recommends making a backup of the settings and memories, touch [YES]. We recommend that you make a backup of them in this step, because all the settings and memories may be reset after updating the firmware.3-5. After the backup file is made, and the firmware selection screen is displayed, touch the firmware update data (for example, 705E127). 3-6. Please carefully read all the precautions, and when you want to execute it, touch [Yes] for 1 second to start the firmware update.3-7. When the update is completed, “Firmware updating has completed.” is displayed, and the transceiver will automatically restart.If the setting data needs to be converted, it may take some time to restart. 4. If the settings and memories have been reset, load the settings and memories that have been backed up onto the microSD card.4-1. Display the SD CARD screen in the Menu.4-2. Touch “Load Setting” on the SD CARD screen to open the LOAD SETTING screen. 4-3. Touch the file name of the saved file. 4-4. Touch “ALL,” and then the dialog “Keep ‘SKIP’ settings in the Repeater List?” is displayed, touch [YES].4-5. The dialog “Load file? The new “REF Adjust” setting will be saved.” is displayed, touch [Yes].4-6. After the loading ends, “COMPLETED! Restart the IC-705.” is displayed, restart the transceiver. After updating the firmware, the Version Information in the OTHERS Set will be as follows.Main CPU: 1.27Sub CPU: 1.01DSP Program: 1.11DSP Data: 1.00FPGA: 1.01DV DSP: 1.02GPS: 13196Bluetooth: 1.12WLAN: 2.0.0.0_2.2.0.7_3.17.0.4 |
| File Size | 8.17MB |
| File Type | zip |
| Manual | manual download page |
Antenna
![4EL 40M @ 190′ [ VIDEO ]](https://qrznow.com/wp-content/uploads/2019/10/maxresdefault-1-265x168.jpg)
4EL 40M @ 190′ [ VIDEO ]
See More: Read more
Big Wheel Antenna for 2m, 70cm and 6m
The “Big Wheel” is a horizontal polarized omni directional antenna. Usually highly directional antennas are used on VHF and UHF, which hav... Read more
![Super Versa Xseries Antenna [ Japan ] 11 and 8 elemets HF Antenna](https://qrznow.com/wp-content/uploads/2016/11/408xmain-265x168.jpg)
Super Versa Xseries Antenna [ Japan ] 11 and 8 elemets HF Antenna
Type number KA1-211X KA1-408X KA1-411X Gain table / size Frequency (MHz) 14-50 7-50 7-50 The total number of elements 11 Elements 8 Elements 11 Elemen... Read more
Portable Antenna Build by K6UDA
K6UDA Radio, The elmer show with attitude. This time I’m building a portable end fed wire antenna that deploys in minutes and is pretty c... Read more
Alpine Mobile Antenna Model 100S
Alpine Mobile Antenna Model 100S Basic model is unpainted silver with a neopreen cover. All models are: 500 Watts 6-80 Meters Motorized 12 volt 39... Read more
2018 QST Antenna Design Competition Winners Announced
ARRL has announced the winners of the 2018 QST Antenna Design Competition. “Dozens of entries were received, but only three could win,” said... Read more
A Simple Wire Tuner
Here’s a basic, but effective and efficient, antenna tuner for feeding random wires, especially half-wave end-fed wires. Read more
Moonraker GPA-RX HF Antenna 2 – 90 Mhz
Key Features/Specifications: Type: Aluminium Vertical with Unun matched base Frequency RX: 2.0-90MHz Impedance: 50 Ohms Base connection: SO239 Length:... Read more
Review
Noise on your Radio!
This is part 1 of 2 of a presentation I made to the Rochester Amateur Radio Association (RaRa) on 3 June 2020 on the subject of noise (QRN) and what c... Read more
Home-Brew HF SDR Receiver by G0ETP
Key Features There are a lot of home brew SDR-related projects on the internet at the moment. I believe the key features of this project are: Small bu... Read more
POWER POLE DC OUTLET – MFJ 1124 , 1106 , 1126, 1128, 1129, 1104
POWER POLE DC OUTLET – MFJ Read more
Icom 7610 HDSDR CW Skimmer Narrow
“I was pretty excited to see this and just wanted to share. More to come on how to set this up. Icom 7610, HDSDR and CW Skimmer” CW Skimme... Read more
The new Malahit-DSP: A portable all-in-one wideband SDR receiver
Technical Specifications 1 MHz to 1000 MHz. Bandwidth 160 kHz. Modulation types AM, WFM, NFM, LSB, USB. Powered by one Li-ion cell. Consumption up to... Read more
Introduction to the SOTABeams Wolfwave
SOTABeams Features Fully adjustable audio band-pass filtering instantly adjustable for voice, data and CW (b/w 50 Hz to 5 kHz) VIDEO State-of-the-art... Read more
Equipment
Icom IC-9700 Picture Mode, New Feature Firmware, DSTAR
“This is a new feature that was added to my IC9700 when I decided to update the firmware. It has been out for a few months now from what I have... Read more
Introduction for Icom AH-705 Automatic Antenna Tuner
JH1CBX Masaco introduces AH-705 designed for IC-705. Descriptions ・Covers the 1.8 MHz to 50 MHz bands 30 m, 98.4 ft or longer antenna: 1.8 – 54 MHz, 7... Read more
Multitalent QUADRO – Cutting – insulation stripping – twisting – crimping.
The unmatched integration of four different functions: Cutting – insulation stripping – twisting – crimping. The quick reloading of connector sleeves... Read more
DU800 – HA8DU Manual Tuners HF+6m
DU 800 HF+6m ANTENNA TUNER FEATURES The DU 800 T optimizes the performance of your antenna and transmitter or SWL receiver by providing adjustable imp... Read more
ANAN-7000DLE 100W HF & 6M Transceiver
The ANAN-7000DLE HF & 6M 100W SDR Transceiver offers top of the line performance is a compact rugged package, it is based on the work of the OpenH... Read more
GZV6000 Switching Mode DC Power Supply – 60 Amp
Special Features: • Size: 8.25″ x 4.5″ x 16″ • Weight: 12.8 lbs. • 60 Amp Continuous Rating, 100% Duty Cycle • Variable Voltage Cont... Read more
INRAD RX7300- New receive antenna socket for IC 7300
RX7300 IHSG and Vibroplex/INRAD announce the release of a new accessory product for the Icom IC-7300 which provides a receive antenna socket on the re... Read more
FlexRadio Systems Maestro
The FlexRadio Maestro™ is an intuitive, plug-and-play control console that directs the operation of any FLEX-6000 Signature Series transceiver without... Read more
