The Hurricane Watch Net (HWN), WX4NHC at the National Hurricane Center (NHC), and The Salvation Army’s SATERN have announced activations for Hurricane Delta, the latest Atlantic storm. The HWN moved to its Alert Level 4 on Wednesday and is now running on 14.325 MHz. WX4NHC monitors the same frequency to gather “ground truth” reports from radio amateurs that may assist NHC forecasters.
As of 1200 UTC, the NHC warned that Delta was bringing “a life-threatening storm surge and strong winds” to the northeastern portions of Mexico’s Yucatan Peninsula, where it made landfall at 1030 UTC. Maximum sustained winds from Delta were clocked at 105 MPH, making it a Category 2 hurricane. The storm was some 35 miles west of Cancun, Mexico, moving northwest at 17 MPH.
HWN Manager Bobby Graves, KB5HAV, said the net got off to a late start because it lacked propagation into the affected area overnight, both on 20 and 40 meters (the net’s secondary frequency is 7.268 MHz). The net anticipates remaining in operation for most of Wednesday, before taking a break and resuming operations on Friday at 1200 UTC on 14.325 MHz and 7.268 MHz. Graves said the net plans to remain in full operation until around midnight CDT.
Delta is currently forecast to be a Category 2 or Category 3 hurricane when it makes landfall on the US Gulf Coast, somewhere south of Lafayette, Louisiana, on Friday afternoon.
WX4NHC is active on both HWN frequencies, as well as on the VoIP Hurricane Net, requesting surface reports from stations in the affected area “with or without weather data for use by NHC forecasters,” Assistant WXNHC Coordinator Julio Ripoll, WD4R, said. WinLink to wx4nhc@winlink.org, with “//WL2K” in the subject line. WX4NHC also has an online Hurricane Report Form.
“NHC appreciates all the surface reports from the affected area during hurricanes as they fill in gaps of not just weather data, but also give a real-time, first-person perspective of what is actually happening on the ground,” Ripoll said.
The International SATERN SSB Net and the Southern Territory SATERN SSB Net plans to activate for Hurricane Delta Thursday through Saturday on 14.265 MHz (alternate 14.312 MHz). The Southern Territory SATERN SSB Net on 7.265 MHz will activate Thursday and again on Friday at 1900 UTC.
SOURCE:ARRL
Review
Chameleon F-Loop TOTAL! Kit and CHA Single Loop
Chameleon F-Loop TOTAL! Kit and CHA Single Loop The CHA F-LOOP 2.0 was designed with portability, ease of use simplicity, ruggedness and high performa... Read more
SDR Play Review and Operation
The SDR-play RSP1 is a powerful wideband fullfeatured SDR which covers all frequencies from 10 kHz up to 2 GHz. All it needs is a PC and an antenna to... Read more
Radioddity GM-30 GMRS HT Walkie Talkie | Best GMRS Handheld Radio?
Radioddity has a new GMRS HT Walkie Talkie and today we’re going to take a look at what comes in the box and the menu of this new GMRS Handheld... Read more
KB8O Demonstrates Receive 4-Square on 160m
Jay Pecora, KB8O from Elyria, OH demonstrates his DX Engineering Receive Four-Square system on 160 meters. Read more
MFJ-1263 – MIC / RIG switch, 2 MIC to 2 RIG
MFJ`s new MFJ-1263 Microphone Control Center lets you mix and match any two microphones to any two transceivers. The microphones or transceivers can h... Read more
Equipment
ES-4 Radio / Antenna Selector Switch between 3 radios and 5 antennas
ES-4 COMES AS A CONTROL UNIT AND A BASE (SWITCHING) UNIT THE BASE UNIT RECEIVES 12V POWER AND HAS ALL THE HEAVY COAXIAL CABLES CONNECTED TO IT. THER... Read more
Station Master DeLuxe – microHam
Station Master DeLuxe™ is big brother of regular Station Master™ and has all its capabilities but provides more ergonomic user interface with... Read more
LA1K5 is a solid-state 1200 watts 1.8 – 54MHz power amplifier
The RFpower LA1K5 is a solid-state 1200 watts 1.8 – 54MHz power amplifier. It uses a ruggedness 1800 watts 65 V LDMOS technology NXP’s MRF... Read more
“New Elecraft K4s in production
K4 TRANSCEIVER We’re pleased to announce our new top of the line transceiver, the Elecraft K4. It combines the latest in direct-sampling technology wi... Read more
Lab599 Discovery TX-500
Today i’m bringing you an update on a very exciting qrp ham radio from Lab599. It’s called the Discovery TX-500. The TX500 is a HF & 6... Read more
Antenna
10 6 MOXI 5 | NEW FOR 2015! | 10 METER / 6 METER MOXON YAGI HYBRID BEAM
Stunning 2015 design from G0KSC: ten meter Moxon mated with a 3 element six meter Yagi on one boom with a common feedline. Look at the pattern and ban... Read more
160m/80m Transmit Vertical by AC0C
Adding topband to a full sized elevated 80m vertical and putting N6LF’s QEX data to the test This antenna started out as an 80m vertical... Read more
The 40/80/160 Meter Coil-loaded Inverted V Dipole Antenna
The 40/80/160 Meter Coil-loaded Inverted V Dipole Antenna See all details: Link Read more
Introducing the SDA 2000 OptimizIR
“Today we’re incredibly excited to announce the launch of our first antenna optimization product: the SDA 2000 OptimizIR. This replaces your e... Read more
20′ DX Flagpole Antenna | OCF HF Vertical Dipole | 3.5 to 50 MHz No Radials, Stealth, Portable
OCF HF Vertical Dipole Higher performance, HF Multiband DX Flagpole Antenna covering 3.5 to 50MHz with NO radials sound like relief for your CC&R... Read more
App - Mobile
SDR Control for Icom
Software Defined Radio Client for Icom Transceivers SDR-Control is a full featured App to operate your Icom Transceiver at home or from around the wor... Read more
Rfinder for Visually Impaired on Android
Rfinder Tom W3ZX, a visually impaired ham gives a great demo on Android using TalkBack for the visually impaired. See More: http://www.rfinder.net/blo... Read more
Real-time Radio Spectrum Map Database Demo [ Android App ]
In view of the escalating demand for higher mobile data (from IoT, industry 4.0 applications), there is a growing world-wide interest to improve the r... Read more
DroidRTTY – RTTY for Ham Radio App Android
Ham Radio App DroidRTTY is an application to decode and encode Ham Radio RTTY with the build in microphone/speaker or wired to your radio. A wa... Read more
RUMlogNG2Go for iOS version 3.3 now available
Thomas Lindner, DL2RUM, is happy to announce the availability of version 3.3 of his RUMlogNG2Go logger for the iPhone and iPad. RUMlogNG2Go can be do... Read more