Phil Karn, KA9Q; Randy Standke, KQ6RS, and members of the Mount Carmel High School Amateur Radio Club (MCHSARC) in San Diego have constructed and deployed an amateur radio marine buoy in the Pacific. The buoy, which transmits WSPR on 14.0956 MHz USB, has already been heard around the continental US, Brazil, Hawaii, Japan, Costa Rica, Australia, and South Africa.
“Over the past year, Randy and I have mentored the MCHSARC in designing and constructing a simple marine buoy that was deployed from the RV Sally Ride [on July 16], about 700 kilometers off the coast of southern California,” Karn said in a post on the AMSAT Bulletin Board. “It is up and transmitting WSPR on 20 meters using the call sign KQ6RS, and is being received all over the US and into Canada and Brazil.” Karn is blogging about the project with updates.
The electronics are the 20-meter WSPR version of the WB8ELK “pico tracker” that has been flown on long-duration balloons. “We removed the solar panels and substituted 21 ordinary alkaline D cells, wired to supply 4.5 V,” Karn explained. “We estimate battery lifetime will be 6 months.”
Karn said that the project made use of everyday hardware. The buoy — essentially a spar buoy — was constructed using a 5-foot section of 4-inch PVC pipe, with sufficient ballast in one end of the pipe to permit it to float vertically in the water. The top is closed using a sewer pressure test plug, which has a bolt in the center that acts as a convenient feed-through and antenna mounting point. The antenna is a stainless-steel CB whip with a matching network.
“We use the sea as a counterpoise, but to avoid direct metal/sea water contact, we lined the inside of the pipe with copper tape to form a capacitive connection,” Karn said.
During initial flotation testing, the project team found that the ballasted pipe alone was remarkably stable in pitch, roll, sway, and surge, but oscillated a lot in heave — i.e., up and down movement. Cross arms were at the water line to add drag in the vertical direction, to counter the issue.
“It wasn’t our intent to mimic a religious icon, but that’s where the physics went,” Karn said. Because sea water was required to tune the antenna, Standke floated the buoy off a dock in Mission Bay.
“We tried to make this thing as rugged as we could,” Karn recounted, offering his favorite saying to the students: “The sea always wins in the end, but we can delay that long enough to be useful.”
Deployment was to be from a NOAA vessel in April, but the trip was canceled due to the COVID-19 pandemic. Standke secured a trip on the RV Sally Ride, a research vessel operated by Scripps Institute of Oceanography.
The first reception report was on July 16 at 12:52:30 UTC from grid square CL89eu, although the current carried the buoy east into CL89fu at 20:32:30 UTC. The buoy (KQ6RS-1) can be tracked on the APRS and WSPRnet sites.
Karn said the project team is already planning its second buoy, which may include two-way links, satellite tracking, and sensors
Source:ARRL
Antenna
An Unusual Jpole Antenna
An Unusual Jpole Antenna Read more
Successful Wire Antennas
Successful Wire Antennas Edited by Ian Poole, G3YWX and Steve Telenius-Lowe, 9M6DXX/ KH0UN If you are interested in wire antennas Successful Wire Ante... Read more
Grounding a Counterpoise on End-Fed Half Wave Antenna
Laurence, WA2TLY, is asking some questions about a few aspects of the EFHW 80-10 antenna, Why they are there and what they are for? Read more
Multi Band QRP Antenna – 40-30*-20-10
QRP DX 40-10 POWER 100w SSB 25w CW The Radio Wavz QRP DX is ideal for those who need to be on the go. Those who want a low profile high performance an... Read more
Antenna Lifting Kite
Antenna Lifting Kite One of the most enjoyable portable activities that you can do with the family or alone is using a kite-borne antenna. I ha... Read more
VHF
QYT KT-780 Plus 100 Watts 2 meter Mobile Radio Review and Demo
The QYT KT-780 Plus is a 100 watt mobile radio on the 2 meter Amateur Radio Band, and works on FM mode. Today we will walk through the menu of the rad... Read more
WRC-19 Day-19: 50 MHz Approved!
WRC-19 has approved an allocation in the 50 MHz band for amateurs in Region 1 at its morning plenary in Sharm El-Sheikh, Egypt, on Thursday 21 Novembe... Read more
Yaesu FT 991 Versus Icom IC-910 in 144MHz
Yaesu FT 991 Versus Icom IC-910 in 144MHz “We compare the FT-991 receiver performance on 2m with two other radios. Justin, G0KSC, from Waters... Read more
DVMega and Pi-Star DMR Hotspot – Ham Radio Q&A
“Don’t let the lack of a repeater keep you from playing with DMR or another digital mode. DMR repeaters are springing up everywhere. There are c... Read more
Alinco DJ-MD5T VHF/UHF 5W DMR HT
Alinco DJ-MD5T VHF/UHF 5W DMR DUal Mode Tier I/II HT Features: DMR Tier I and Tier II 1.77 inch TFT color LCD VFO/MR Switch Output Power Selection (5W... Read more
Equipment
Ten-Tec PM1 QRP
Description The MX1, AA1, VO1, and TX1 modules are wired into a band-switching 80-40 meter CW transceiver. Front panel controls: On-off, Transmit-Rece... Read more
Yaesu FT DX 3000
The Yaesu FT DX 3000 – Building on the YAESU FT DX Heritage The FT DX 3000 is member of the long line of top performing YAESU FT DX Series of tr... Read more
XPA125 Tuner – Any good?
Today I take the XPA125 Tuner and put it through its paces with a 9:1 EFRW Random Wire Antenna Read more
Digital Modes
The Ultimate Portable Ham Radio Computer
Hello Operators. In this episode of the OH8STN ham radio, we are discussing replacing the raspberry pi field computer build, with the Microsoft Surfac... Read more
Get Started with FT8 – An Introduction for Beginners
FT8 is a mode in the WSJT-X software developed by Dr Joe Taylor K1JT. In this video I show how to get started and make contacts with FT8, introduction... Read more
WSJT-X Version 2.5.1 has been Released
The WSJT-X development team has announced the general availability release of WSJT-X version 2.5.1. This release mainly contains i... Read more
WSJT-X Errors? Try This Simple Fix
Does WSJT-X display errors when you transmit with your radio? Try this simple fix which has helped me get rid of those frustrating errors. Read more
WSJT-X version 2.5.1 released
WSJT-X version 2.5.1 releasedThe development team have announced the General Availability (GA) release of WSJT-X version 2.5.1. This release mainly co... Read more