Technical characteristics of HF power amplifier BURST-2000A
2200 W PEP output power (SSB and CW)
All HF bands, including WARC bands and 6 meters
Rated input power: 15 W
AC mains voltage 230 V
LCD display
Ethernet control (optional)
Modern design
Intuitive menu
All types of protection:
– CWS
– overcurrent
– overheat protection
– excess input power
– protection against range switching errors (LPF Error)
Permissible operating conditions
– Working temperature range: -10 ° C (antifreeze) + 40 ° C
– Relative air humidity up to 95% (at 35 ° С)
Dimensions of the device (without protruding parts)
– 352 x 395 x 153 mm.
The amplifier is very easy to manage. With the help of the on-screen menu, even a beginner radio amateur will cope with the settings
Color TFT display with a diagonal of 4.3 inches (95 x 53 mm), a resolution of 480 x 272 pixels and 24-bit color
There is a possibility of remote control via Ethernet (optional)
The operator is able to track all the main characteristics of the operating mode in digital form.
Failure statistics – detailed information about all abnormal situations of the DM is stored in non-volatile memory
Modern protection schemes ensure the integrity of the device’s electrical circuits
Light and compact relative to its power
Suitable for use with any transceiver.
Controlled by standard signals. Transmission mode (PTT) is activated by applying a zero. Rated power at the RF input device 15 W
The transceiver output is well matched to the broadband input. The CWS level is at 1.2: 1 in the range of 1.8 – 54 MHz without any adjustments.
Automatic transceiver control via CAT protocol (optional). The MIND continuously monitors the operating frequency and produces a change in the ranges
Built-in frequency meter, band decoder, as well as AUX connections, in case of not using the CAT connection, will determine the frequency and allow the amplifier to correctly control the working range
Field effect transistors type BLF188 (MOSFET) are able to withstand high levels of output error (high value of VSWR)
Exceptional electromagnetic compatibility with different sensitivity units, allows you to connect to almost any device
High-quality surge protection and automatic compensation of reactive power is achieved through a high-quality switching power supply.
Input voltage range (85-300 V) – http://burst.su/
VHF
AnyTone AT-D868UV dual-band VHF and UHF DMR portable
AnyTone AT-D868UV Today, Qixiang Electron Science & Technology Co., Ltd, the Chinese manufacturer that produces the AnyTone line of two-way... Read more
Icom ID-51 50th Anniversary version and ID-51 Plus Firmware Update Release E1
Icom ID-51 If you were one of the customers who purchased a 50th Anniversary version of the ID-51 or the latter ID-51 Plus, then there is a firmware u... Read more
YAESU DR-2X 144/430 Dual Band C4FM/FM Digital Repeater With Dual Transmit and Dual Receive
YAESU DR-2X Features Easy Migration…. The repeater controller, receiver and transmitter are all packaged into a 19” standard cabinet rack mount panel... Read more
Comparing the RFinder K1 and M1 Devices
“This will be the 4th or 5th video I have done on or about an RFinder device. This Android DMR and phone device has been my daily carry for abou... Read more
BTECH UV-5X3 Handheld Tribander
BTECH UV-5X3 An Affordable Tribander HT Available Today! BaoFeng Tech announced today the release of the BTECH UV-5X3 The UV-5X3 is more than just a... Read more
Equipment
Arduino Antenna Rotator – DIY
“After 5 years of operation of the antenna HexBeam I decided to remove the antenna from the chimney and put on a 10m mast in the garden. In the... Read more
OFF-GRID HAM RADIO: Simple Emergency Communication When the Grid Goes Down
Check great article about Emergency Communication from Robert Richardson : Read more
OM4000 HF POWER AMPLIFIER – 4KW
GENERAL DESCRIPTION OF THE OM4000 HF POWER AMPLIFIER The linear amplifier OM4000 HF is designed for all short wave amateur bands from 1.8 till... Read more
Uniden SDS100 – Coming Soon
Uniden creates another first with the SDS100 True I/Q Scanner, the first scanner to incorporate Software Defined Radio technology to provide incredibl... Read more
Elecraft KX2 announced at the Dayton Hamvention 2016
Elecraft KX2 Hello to all, We are please to announce a new radio to complement the KX3 and the KX-Line. Here are the details. What: Elecraft announc... Read more
