An Excellent Dual Band Yagi for 70/144MHz on a 2.4m boom and single feed point
The 4-2-12 Dual Band Yagi has a total of 12 elements, 5 elements are used on 70MHz while 7 elements are used on 144MHz. The 4-2-12 InnovAntennas Dual Band Yagi stands aside from the crowd due to the methods used for it’s design. The 4-2-12 uses no traps or coils, no phasing arrangements and has no need for ‘compromise’ spacing between elements as the antenna has a set of correctly spaced elements for either band but still deploys only one feed point. An excellent antenna with great SWR bandwidth and performance in one package.
Performance
Gain on 70MHz: 9.78dBi @ 70.20MHz
F/B on 70MHz: 21.11dB @ 70.20MHz
Gain on 70MHz at 10m above Ground: 15.46dBi
Gain on 144MHz: 11.96dBi @ 144.300MHz
F/B on 144MHz: 19.02dB @ 144.300MHz
Gain on 144MHz at 10m above Ground: 17.82dBi
Power Rating: 3kw+
SWR 50MHz: Below 1:1.4 from 70.00MHz to 70.400MHz
SWR 70MHz: Below 1:1.5 from 144MHz to 144.800MHz
Boom Length: 2.4m
Weight: 6Kg / 12.2LB
Turning Radius: 2.396m
Wind Loading: 0.2 Square Metres
Wind Survival: 241KPH / 150MPH
Specification
This antenna is made with (10mm). The antenna has fully insulated elements which will ensure continuous, high performance for many years to come. Boom to mast brackets are included with all antennas which will support 2 inch (50mm) masts. Boom is 30mm square aluminum with 2mm wall thickness.
Our antennas are constructed with the best quality materials in order that the best mechanical construction can be achieved, not the cheapest and most profitable! Even a digital caliper is used (with an accuracy of .01mm) to measure the elements during production to ensure they are within 0.2mm of what they should be, ensuring they work as well as our software model predicts.
Note: Much development time has gone into our antennas, not just on basic electromagnetic design, we are able to model the effect of insulators, booms and other objects to ensure the make up of our antennas have least effect on performance and pattern degradation. More information can be found here
- Marine grade Stainless Steel Fittings
- Original Stauff Insulation clamps
- Mill finished boom and elements for highest levels of accuracy
£199.95
Equipment
QRPGuys 40/30/20m DSB Digital Transceiver – $40
Have you ever wanted to try the new digital modes on a budget? The QRPGuys DSB Digital Transceiver is a low cost, multiband, DSB transceiver kit, curr... Read more
Wideband RF Switch (5 – 3000 MHz)
Photo: Aditya Mukherjee In an application it was required to use 6 different antennas at 6 nearby locations one at a time as the Bluetooth/WiFi antenn... Read more
Amplifier 1.2 kW Spert 1200 – 1.8 to 50 MHz
Output power of 1200 W CW / SSB in the field KF, 700W in the band of 50 MHz Power 50V 35A efficiency of 73-75% frequency range 1.8 to 50 MHz switching... Read more
Connecting the MX-P50 amplifier and LDG Z11 pro tuner to the IC-705
Connecting the MX-P50 amplifier and LDG Z11 pro tuner to the IC-705. Read more
VHF
IP Radio – Icom IP100H
Icom IP100H Overview Icom’s IP100H WLAN or IP radio is a compact, yet powerful device.Measuring only 95 mm high (~3.7 inches) and weighing 205 grams (... Read more
Ultimate HT Antenna Shootout
HT Antenna The most common question I get? What antenna do you use or recommend for your hand held ham radio? Well today, I’m going to put... Read more
144 MHz signal from the Faroe Islands heard 3000kms away in Bulgaria during Geminid Meteor Shower – Dec 2020
Every year, the Geminid meteor shower peaks around the 14th of December and many VHF radio amateurs make contacts by bouncing signals off the meteor t... Read more
6000km TEP path on 144 MHz opens up between Buenos Aires and the Dominican Republic
Hot on the heels of the last post about the 5400km TEP opening on 144 MHz between Argentina and the island of Aruba, we have details of some more cont... Read more
App - Mobile
SDR Touch demo on Android device using SDRplay RSP
This demonstrates turning an Android Tablet (or Android Phone) into a highly portable comms receiver or spectrum analyzer operating from Long Wave to... Read more
Yaesu FT817 CAT Control Setup & BT Remote Control | Android
In this video we run through setting up a bluetooth CAT control for the Yaesu FT-817, using an Android Tablet, bluetooth interface, and Yaesus... Read more
EchoLink for iOS version 2.10.18 is now available
EchoLink for iOS version 2.10.18 is now available in the App Store. This is a 64-bit build that is fully compatible with iOS 10 and modern iOS devices... Read more
MagicSDR – A NEW ANDROID AND IOS RTL_TCP CLIENT
MagicSDR makes it possible to interactively explore RF spectrum using panadapter and waterfall visualization, demodulate and play AM, SSB, CW, NFM, WF... Read more
Review
Motorola MOTOTRBO XPR 7550 I.S. DMR portable radio review by VA3XPR
Motorola MOTOTRBO XPR 7550 I.S. DMR portable radio review BY VA3XPR Read Full Review : Read more
DV4home New Software – DMR / D-Star crossmode, C4FM, Brandmeister, IPCS2 added
“I’m currently testing a new software for the DV4home. The modifications included, the DMR+ complete masters list, the Brandmeister reflec... Read more
Ham Radio Tower, US Tower MA40, Installation in Process by Jim Heath W6LG, Your YouTube Elmer
Jim W6LG your YouTube Elmer shows the progress on the MA40 Tower Installation that will be limited to 30 feet above the terrain as allowed by Ordinanc... Read more
Digital Modes
The Ultimate Portable Ham Radio Computer
Hello Operators. In this episode of the OH8STN ham radio, we are discussing replacing the raspberry pi field computer build, with the Microsoft Surfac... Read more
Get Started with FT8 – An Introduction for Beginners
FT8 is a mode in the WSJT-X software developed by Dr Joe Taylor K1JT. In this video I show how to get started and make contacts with FT8, introduction... Read more
WSJT-X Version 2.5.1 has been Released
The WSJT-X development team has announced the general availability release of WSJT-X version 2.5.1. This release mainly contains i... Read more
WSJT-X Errors? Try This Simple Fix
Does WSJT-X display errors when you transmit with your radio? Try this simple fix which has helped me get rid of those frustrating errors. Read more
WSJT-X version 2.5.1 released
WSJT-X version 2.5.1 releasedThe development team have announced the General Availability (GA) release of WSJT-X version 2.5.1. This release mainly co... Read more