Main functions:
- Always used one same – three to one – module.
- Put together up to four module expand up to 12 inputs.
- Available add same module to next layer for next outputs (more second outputs).
- Additionally expandable at a later time.
- Using antenna output shows the LEDs.
- Controled by grounded input (default), or high polarity (if soldered reverse all diode).
- Power voltage 12V typicaly, dependency to used relay.
- One module PCB size 85x85mm.
- RF power loading
- 8A default PCB current (2,7 mm x 1oz)
- >16A with additional wire soldering
- 16A switching current
See More:
Buddipole vs AlexLoop Walkham Tried to do the most objective analysis on a comparison between the Buddipole and a AlexLoop Walkham antenna. I used a KX3 without the tuner activated with 10W output. Both antennas had roughly a 1.1 to 1.5:1... Read more
More Antennas
![Stealth Antennas [ PodCast ] – Everything Ham Radio](https://qrznow.com/wp-content/uploads/2017/01/wellbrokk-1530-loop-90x60.jpg)
![Ground Plane Antennas [ “ARRL The Doctor is In” podcast ]](https://qrznow.com/wp-content/uploads/2018/12/a-ground-plane-antenna-for-noaa-weather-stations-90x60.jpg)
![4-Square installation in Eastport, Maine [ W2RE ]](https://qrznow.com/wp-content/uploads/2018/08/OZ1RDP_08_KBS_232_4Square-90x60.jpg)
