The CommRadio CTX-10 blends high performance, internal SDR technology, high efficiency circuit design, compact size and simple operation. This multi-mission QRP radio is ideal for field use and emergency operations. Transmitter covers 160-10 meter amateur bands with output power adjustable from 1 to 10 watts. The new design uses ruggedized land mobile power amps in push-pull. Every aspect of the radio design is optimized for low power consumption.
The efficient and sharp OLED display is readable in low or high lighting conditions. The radio has three built-in #18650 3.7V 2600 mAh Li-ion batteries providing 28.8 watt-hours of operation. A built-in intelligent charger provides seamless power management.
The general coverage receiver section uses multiple preselectors for optimized reception from 200 kHz to 30 MHz. An integrated CW reader and antenna tuner enhances portability. The premium tuning knob optical encoder is rated at a million revolutions.
Entire enclosure is aluminum with metal knobs and front panel. External connections are through-hole mounted for durability. Includes USB cable, DC power cord and manual. DC power requirements: receive 1.5 W, transmit 20 W. This quality device is robustly built in Colorado, U.S.A.
Transmit Bands: 160-10 meters CW/SSB
RF Power Output: 1 to 10 Watts
Receive Coverage: 200 kHz – 30 MHz
Receive Modes: USB/LSB/CW/AM/FM
Receive Bandwidths: AM 5/7.5/15 kHz
SSB 1.8/2.2/2.6 kHz
CW 0.5/1/1.8/2.2/2.6 kHz
NBFM 15/25 kHz
Receive Auto Bandwidths:AM 5/7.5/15 kHz
SSB 1.8/2.6 kHz
CW 1/0.5 kHz
Tuning Resolution: 1MHz, 100, 10, 1 kHz, 100, 10 Hz.
HF Sensitivity MDS: -130 dBm (500 Hz BW)
Audio System: 8 Ohm 0.8 watts to
1.2×1.6″ Internal Speaker
or External Speaker jack
AGC Attack Time: Slow/Medium/Fast
Antenna Input: BNC 50 Ohm
Display Types: OLED 64×128
DC Power Jack: 10-20 VDC 2.5 x 5mm
DC Power: 2.0 Amps @12VDC
Batteries: 3 #18650 Li-ion 2.6 Ah
USB Mini-B 2.0 Jack: Charges battery while
I-Q data & radio control
Windows spectrum scope
ESD Protection: ESD diodes at antenna, power jacks,
USB port, keys and knobs.
Physical: 5.7 x 1.6 x 6.7″ 2.2 lbs.
|This device has not been approved by the F.C.C. This device may not be offered for sale or lease or be sold or leased until approval of the F.C.C. has been obtained. The information shown is preliminary and may be subject to change without notice or obligation. Availability is estimated for early 2017.|
Amplifier, HT, VHF, Solid State, 144-148 MHz, 3/50 W In, 200/200 W Out, UHF Fem, SO-239, 13.8 Vdc, 25 A, Each Add this amp to your 2 Meter HTor mobile... Read more
The DX-Patrol is a Software Defined Radio (SDR) receiver with a very wide receiving frequency range. In contrast to the usual cheap USB DVB-T sticks t... Read more
This demonstrates turning an Android Tablet (or Android Phone) into a highly portable comms receiver or spectrum analyzer operating from Long Wave to... Read more
Description Functional overview of the application DR functions You can use some transceiver’s DR functions. Share pictures Send and receive vo... Read more