The INRAD DMS-629 and DMS-650 microphones have been chosen by FlexRadio as the official desk microphones for use with all of our transceivers. M629 or M650 microphone, DMS-1 heavy PTT desk stand and a detachable coiled cable that runs from the back of the base into the microphone jack on your radio. These are sold as a complete package at $158 retail.
Plug the detachable coiled cable into the mic jack on your transceiver, and you’re ready to operate. To use the microphones with any of the 3 conductor TRS + RCA phono, 8 pin Foster, or RJ-45 modular, plug in a different accessory cable. Easy! One detachable cable is included with the $158 purchase price.
The base is metal and weighs 2.5 pounds to keep it from sliding around or being knocked over easily on the desk. Total weight of base and desk microphone, over 4 pounds. Metal microphone body, standard 5/8 x 27 thread metal standpipe, rubberized microphone clip. The circular rubber ring around the circumference of the metal standpipe for the mic clip is an internal shock mount for noise isolation.
Large push-to-talk switch on the base front. To lock the PTT for those longer QSO’s, slide the silver slider switch to the left while the PTT switch is down. To release, slide back to the right.
Want a different on-air sound from a different INRAD microphone? The M-series microphones on the base are also interchangeable. To change from one mic to another, unplug the 3 pin XLR cable from the back of the mic and pull it off the clip. Plug in the new mic, put it on the stand. It’s that simple.
Alternatively, the M-series microphones can be purchased alone. M-series microphones are supplied with a cable from 3 pin XLR to 1/8″ mono male jack that is used with M-series adapters to plug into the transceiver.
This is an unboxing video about the Elad FDM-DUO, a small stand alone SDR QRP, also comes with a complete SDR control software. Read more
General Amateur Radio Exam part 5. Volunteer Examiners, good operator practices. Reactance demonstration. Read more
Jim W6LG plays recordings of an Elecraft K3s and a Yaesu FT-450. Which sounds best to you? Vote for receiver #1 or receiver #2 and give a very short d... Read more
Jim W6LG uses a signal generator and a panadapter to measure the loss in 30 coax connectors at 14 and 52 mhz down to a fraction of a db. You might be... Read more
“Here’s a brief tour and review of the CR-1a from Commradio. This SDR has excellent build quality and performance. The price is moderately... Read more
A high-quality external speaker that matches the IC-7610 best. Dual watch ® is also comfortable with input switching . Dual watch can be done comfort... Read more
Plug and play USB recording microphone with 5.9-Foot USB Cable included for computer PC laptop that connects directly to USB port for record music,com... Read more
Specifications Dimensions ............ 19.0W x 5.25H x 20.0D inches Weight ................ 15 Lbs. (19 Lbs. ship) Frequency Range ........ 5 - 30000... Read more
DB1NTO APRS Transceiver After a few months of development, I can now imagine the presumably world’s smallest APRS transceiver. It is not only ab... Read more
The BT1500A 1500 watt balanced antenna tuner is the only 1500 Watt, Double-L Network antenna tuner on the market today covering 20m to 160m (25... Read more
Frequency range RX & TX: 100 kHz ~ 30 MHz* Modes: USB & LSB & CW Power output: 5 Watts Operating voltage: 12 vdc Operating current: 0.35... Read more
Download NASA Sounds Here’s a collection of NASA sounds from historic spaceflights and current missions. You can hear the roar of a space shuttl... Read more
Apple has released a new app for digital QST (version 5.1) readers that use that platform. A long-standing problem involved the inability of some Appl... Read more
FlexRadio Systems announces the release of SmartSDR for iOS v2.1.0 is now available for download or update from the Apple App Store. This App requires... Read more
Hold a mega-station in the palm of your hand. Wherever you are, you can work DX and log it. Operate from our 18 unique stations to snag a new country,... Read more
Morse Decoder decodes Morse code characters through the built-in microphone of your Android device. Morse Decoder can be used by Ham Radio operators o... Read more
Wizkers:Radio is a controller for various Amateur Radio equipments. At the moment, it supports several Elecraft radios and amplifiers, as well as the... Read more
Joe Taylor, K1JT, Steve Franke, K9AN, and Bill Somerville, G4WJS April 22, 2019 Introduction: FT4 is an experimental digital mode designed specificall... Read more
“Neil investigates what really matters when you are aiming for the ultimate performance with FT8 and other digital modes. He demonstrates and ex... Read more
“We are pleased to announce the availability of V1.0a of the Spectrum Analyser software developed by Steve Andrew specifically for the RSP line... Read more
This is a view from NASA of the sun today, October 9, 2018, and I am making 10m DX contacts one after another. Zero sunspots but working DX on... Read more
“Hi Folks, Thanks for staying patient with me on this one. Build servers were being weird today! Happy to bring you release with simple features... Read more