7 elements full size arranged on a single boom, divided into 2 parts for 20 m, 2 elements for 15m and 3 elements for 10m in spotlight radiator configuration and reflector-radiator-director.
The system is optimized in order to make the maximum gain ratio of forward and front / back, for each individual user bandwidth.
The antenna has been shaped with the most sophisticated computing software NEC, based on the integral method of moments MoM (Method Of Moments), and optimized with heuristic algorithms (PSO).
Starting from the numerical model, the antenna has followed the prototype phase through iterative cycles of measurement and optimization, until reaching the convergence between the design features and performance, verified ” in situ .”
The main structure of the Delta Loop “The Claw” is made in aluminum parts and steel, dimensioned to work entirely in the elastic range. In this way the structure appears to be elastic and simultaneously very robust .
Unlike structures made in another material (eg. Glass fiber), aluminum systems confer a considerable duration and better response to wind loads.This allows to keep stable the antenna geometry (shape) and avoid sudden changes in impedance, efficiency and decay properties of the remaining features of the system.
Three impedance adapters to match the range high dielectric strength (600 kV) independently feeding the radiating elements of each band.
The upper cable, produced by Smartech Projects, has excellent resistance to tearing and abrasion. It ‘also highly refractory to the actions of UV rays and to chemical attack. In it, the greater the current flowing in RF of the whole system and is therefore composed of pure copper of 99.99% (with staganatura antioxidant) and isolated with special polymer that has excellent dielectric characteristics (better insulation of the glass.)
Polar patterns of far-field radiation (far field) typical.
The diagrams show the solid irradiation for installation at 20 m above the ground and for greater distances the Fraunhofer away.
Legal and Technical Area +39 0972 537 000
Administration and Commercial Area +39 080 21 41 995
Fax +39 0972 530 200
Mobile +39,320,872 1052
3D Print – 3 element 2m (145 MHz) Ultra Portable yagi by OK1CDJ Description Tape measurement yagi. Weight only 170 g. The longest part is 530 mm... Read more
The new 6-4-20 is a serious performer with an 11.1m computer optimised tapered boom and 10 elements on both 50MHz and 70MHz with a single feed point.... Read more
Some things to think about when you set up your first ham radio station operating position. A quick look at Larry WD0AKX’s console. ... Read more
“Curiosity got the best of me. I finally ordered a DMR handheld radio and picked the new TYT MD-2017 UHF/VHF DMR Analog unit. I’ve never u... Read more
MFJ-269C Covers 530 KHz-230 MHz and 415-470 MHz . . . SWR . . . Complex RFImpedance: Resistance(R) and Reactance(X) or Magnitude(Z) and Phase(degrees)... Read more
ColibriDDC Receiver: This small-size receiver is intended to receive signals covering the HF frequency band 0.09MHz to 55MHz, and also (wit... Read more