The new LFA-R reflector-less Yagi is a step forward in Yagi design and performance. Excellent levels of gain per foot of boom from this compact super-performer
The new 6R6-HD from InnovAntennas
The new LFA-R is a new, reflector-less Yagi from the design table of G0KSC. The LFA-R provides excellent performance in terms of both forward gain and F/B too and covers the important bottom end of the 50MHz band with ease.
The 6R6 sits on a 6.5m (21′) boom yet punches with a very respectable 12.1dBi gain while still delivering well over 21dB F/B (front to back) ratio.
- Marine grade Stainless Steel Fittings
- Original Stauff Insulation clamps
- Mill finished boom and elements for highest levels of accuracy
- Optimised by computer for best possible performance
- No matching device means no matching loss!
- Easy and fast fit, assemble in just a few minutes
For more information Email here
Gain: 7.67dBi @ 50.15MHz
F/B: 17.25dB @ 50.15MHz
Peak Gain: 7.90dBi
Gain 10m above ground: 13.26dBi
Peak F/B: 25.56dB
Power Rating: 5kw
SWR: Below 1.5.1 from 50MHz to 50.4MHz
Boom Length: 6.6m
Safe Wind Speed: 160Kph/100Mph
Turning Radius: 0.5m/1.5ft
Vertical Stacking: 4m
This antenna is made with a 5/8 inch (15.88mm) and 1/2 inch (12.7mm) diameter tube LFA loop and 3/8 inch (9.525mm) elements with a wall thickness of 1.6mm. Parasitic elements are tapered, 5/8” to 1/2” tube ensuring high performance for many years to come. Boom is 1.5inch. This antenna is not made cheaply, it is made to perform and to do so for many years.
No figures are made up here as they are in some Ham Radio adverts, all performance figures are verified in the very latest software simulation packages with some antennas being professionally confirmed on an antenna range.
See More: Link